FHP BELT SHEAVES
SINGLE GROOVE 2" X 1.75" A-BELT ALUMINUM SHEAVE WITH 3/8" - ID-BRWAZ20X3/8 >
SINGLE GROOVE 2" X 1.75" A-BELT ALUMINUM SHEAVE WITH 3/4" - ID-BRWAZ20X3/4 >
SINGLE GROOVE 14" X 13.75" A-BELT ALUMINUM SHEAVE WITH 1/2" - ID-BRWAZ140X1/2 >
SINGLE GROOVE 12" X 11.75" A-BELT ALUMINUM SHEAVE WITH 1" - ID-BRWAZ120X1/2 >
SINGLE GROOVE 10" X 9.75" A-BELT ALUMINUM SHEAVE WITH 3/4" - ID-BRWAZ100X3/4 >
SINGLE GROOVE STEEL SHEAVE WITH 1" - ID-BRWAS44X1 >
SINGLE GROOVE STEEL SHEAVE WITH 1" - ID-BRWAS34X1 >
SINGLE GROOVE STEEL SHEAVE WITH 1" - ID-BRWAS30X1 >
SINGLE GROOVE STEEL SHEAVE WITH 5/8" - ID-BRWAS21X5/8 >
SINGLE GROOVE CAST IRON SHEAVE WITH 3/4" - ID-BRWAL84X3/4 >
SINGLE GROOVE CAST IRON SHEAVE WITH 1" - ID-BRWAL84X1 >
8.5" X 8.5" X 4.25" CHAIN COUPLING COVER-BRWAL80 >
SINGLE GROOVE CAST IRON SHEAVE WITH 1" - ID-BRWAL64X1 >
7.19" X 7.19" X 3.25" CHAIN COUPLING COVER-BRWAL60 >
CHAIN COUPLING COVER 6.06" X 6.06" X 2.63"-BRWAL50 >
COUPLING COVER SEAL KIT: INCLUDES 2" SEALS, & 2" GASKETS.-BRWAL4020AK >
6.06" X 2.63" CHAIN COUPLING COVER-BRWAL4020 >
AL-4012-AK Chain Coupling Accessory Kit: Includes 2" Cover Halves, 4" Seal, Gaskets, &
CHAIN COUPLING ACCESSORY KIT: INCLUDES 2" COVER HALVES, 4" SEAL, GASKETS, & HARDWARE-BRWAL4012AK >
6.06" X 2.5" CHAIN COUPLING COVER-BRWAL40 >
SINGLE GROOVE A-BELT SHEAVE WITH 3/4" -ID-BRWAL124X3/4 >
SINGLE GROOVE A-BELT SHEAVE WITH 1" - ID-BRWAL114X1 >
3 GROOVE SHEAVE-BRW3BK60H>
2 GROOVE SHEAVE-BRW2AK184X17/16>
Recently Viewed
JASON AX53 COGGED CLASSICAL V-BELTS. 1/2" TOP WIDTH, 5/16" THICK, 55" OUTSIDE LENGTH
COGGED CLASSICAL V-BELT. 1/2 " TOP WIDTH. 5/16 " THICK. THIS IS A CLASSICAL SERIES BELT, WHICH IS MUCH HIGHER QUALITY AND STRONGER THAN An FHP BELT WITH THE SAME MEASUREMENTS.
-JASAX53 >
Armstrong® 10-218 Deep Length Socket, 1/4 in Square Drive, 9/16 in, 6 Points
BIODEGRADABLE AND ULTRAVIOLET RESISTANT. VERY DURABLE, FLEXIBLE, AND RESISTANT TO SALTWATER DAMAGE. UDEAL FOR USE AS SHIPS LINES, FISHING NETS, AND FURNITURE
-JWH705188 >
1-1/4X1/2-SSR 1-1/4" -female Pipe Threadx1/2" -female Pipe Thread Stainless Steel Reducer
1-1/4" -FEMALE PIPE THREADX1/2" -FEMALE PIPE THREAD STAINLESS STEEL REDUCER-FIT11/4X1/2SSR >
Dodge® 070280 Type S2000 Pillow Block Roller Bearing Unit, 2-3/16 in Dia Bore, 6.56 to 6.94 in L Bolt Center-to-Center, 2-1/2 in Base to Bore Centerline, 8.88 in OAL 5 in OAH
Dodge® 070280 Type S2000 Pillow Block Roller Bearing Unit, 2-3/16 in Dia Bore, 6.56 to 6.94 in L Bolt Center-to-Center, 2-1/2 in Base to Bore Centerline, 8.88 in OAL x 5 in OAH
Freud® 28-100 Panel Pilot Router Bit, 3/8 in Dia Cutting, 3 in OAL, 1 in D Cutting, 1/4 in Dia Shank, Carbide
Panel Pilot bits are the fast, efficient solution for cutting openings in paneling, siding, sheathing and other applications were speed and accuracy are the primary considerations. Freud’s carbide tipped and solid carbide Panel Pilot Bits will outlast high-speed steel bits many times before sharpening. The drill through point allows self-starting, and the pilot acts as a guide for template work. For use in hand-held routers.
