A-B-C-D-E SHEAVES
AK-25X3/4 Single Groove 3/4" -ID A-belt
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK25X3/4 >
AK-25X5/8 Single Groove 5/8" -ID A-belt
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK25X5/8 >
AK-26X1/2 Single Groove 1/2" -ID A-belt
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK26X1/2 >
AK-26X3/4 Single Groove 3/4" -ID A-belt
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK26X3/4 >
AK-26X5/8 Single Groove 5/8" -ID A-belt
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK26X5/8 >
AK-27X1/2 Single Groove 1/2" -ID A-belt
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK27X1/2 >
AK-27X3/4 Single Groove 3/4" -ID A-belt
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK27X3/4 >
AK-27X5/8 Single Groove 5/8" -ID A-belt
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK27X5/8 >
AK-28X1/2 Single Groove 1/2" -ID A-belt
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK28X1/2 >
AK-28X3/4 Single Groove 3/4" -ID A-belt
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK28X3/4 >
AK-28X5/8 Single Groove 5/8" -is A-belt
SINGLE GROOVE 5/8" -IS A-BELT SHEAVES-BRWAK28X5/8 >
AK-30-H Single Groove 3.05" X 2.80" X 2.48 A-belt For Use With H-bushing
SINGLE GROOVE 3.05" X 2.80" X 2.48 A-BELT FOR USE WITH H-BUSHING SHEAVES-BRWAK30H >
AK-30X1/2 Single Groove 1/2" -ID A-belt
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK30X1/2 >
AK-30X3/4 Single Groove 3/4" -ID A-belt
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK30X3/4 >
AK-30X5/8 Single Groove 5/8" -ID A-belt
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK30X5/8 >
AK-30X7/8 Single Groove 7/8" -ID A-belt
SINGLE GROOVE 7/8" -ID A-BELT SHEAVES-BRWAK30X7/8 >
AK-32X1/2 Single Groove 1/2" -ID A-belt
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK32X1/2 >
AK-32X3/4 Single Groove 3/4" -ID A-belt
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK32X3/4 >
AK-32X5/8 Single Groove 5/8" -ID A-belt
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK32X5/8 >
AK-32X7/8 Single Groove 7/8" -ID A-belt
SINGLE GROOVE 7/8" -ID A-BELT SHEAVES-BRWAK32X7/8 >
AK-34X1/2 Single Groove 1/2" -ID A-belt
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK34X1/2 >
AK-34X3/4 Single Groove 3/4" -ID A-belt
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK34X3/4 >
AK-34X5/8 Single Groove 5/8" -ID A-belt
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK34X5/8 >
AK-39X3/4 Single Groove 3/4" -ID A-belt
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK39X3/4 >
Recently Viewed
MARXBOREâ„¢ 80699 384 Heavy Duty Jobber Length Drill Bit, #55 Drill - Wire, 0.052 in Drill - Decimal Inch, 135 deg Point, HSS, Black/Gold Oxide
MARXBOREâ„¢ 80699 384 Heavy Duty Jobber Length Drill Bit, #55 Drill - Wire, 0.052 in Drill - Decimal Inch, 135 deg Point, HSS, Black/Gold Oxide
Crescent® 56064 Key Set, 10 Pieces, 3/32 to 3/8 in Hex, Cushion T-Handle Handle, Alloy Steel, Black Oxide
Crescent® 56064 Key Set, 10 Pieces, 3/32 to 3/8 in Hex, Cushion Grip/T-Handle Handle, Alloy Steel, Black Oxide
UNIVERSAL JOINTS-U-JOINTS-CHI209117>
RIDGID® 36018 K-45 Sink Drain Cleaning Machine, 3/4 to 1-1/2 in Drain Line, 115 VAC
K-45 is a hand held drain cleaning machine used to clean secondary drain lines (such as found in kitchens, bathrooms and utility rooms) from 3/4 in to 2-1/2 in diameter with the correct cable. Depending on the cable choice, the drum will hold up to 50 ft of cable. The K-45 is available with two feed styles, manual feed and AUTOFEED® (AF). Both have a slide action chuck for quick locking/releasing of the cable. The AUTOFEED allows the cable to be advanced and retrieved with the push of a lever. Helps keep hands and work area clean. The manual version requires that the cable be fed in and out of the drum by hand. The K-45 is a double insulated design equipped with a polarized plug. A FOR/REV switch controls drum and cable rotation and the variable speed ON/OFF switch provides control of the motor. The two piece twist-lock drum will not dent or corrode, and allows easy access to the inner drum. The inner drum allows quick cable change out, helps prevent cable flip over in the drum, and reduces the likelihood of drum leakage.
Bussmann GMA-500MA Electronic Low Breaking Small Dimension Fast Acting Fuse With Nickel Plated Brass End Cap, 500 mA, 250 V AC, 35 A, 10 kA Interrupt, Cylindrical Body
Bussmann GMA-500MA Electronic Low Breaking Small Dimension Fast Acting Fuse With Nickel Plated Brass End Cap, 500 mA, 250 VAC, 35 A, 10 kA Interrupt, Cylindrical Body
This 20V MAX Cordless 1/2-inch Hammer Drill comes equipped with a heavy-duty ratcheting nitro-carburized metal chuck with carbide inserts for superior bit-gripping strength and a high-efficiency brushless motor that delivers up to 75% more runtime than brushed. It features a 3-mode LED, providing light in dark or confined spaces, and is 20X brighter than the previous model. Battery and charger sold separately.
