A-B-C-D-E SHEAVES
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK25X3/4 >
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK25X5/8 >
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK26X1/2 >
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK26X3/4 >
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK26X5/8 >
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK27X1/2 >
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK27X3/4 >
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK27X5/8 >
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK28X1/2 >
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK28X3/4 >
SINGLE GROOVE 5/8" -IS A-BELT SHEAVES-BRWAK28X5/8 >
SINGLE GROOVE 3.05" X 2.80" X 2.48 A-BELT FOR USE WITH H-BUSHING SHEAVES-BRWAK30H >
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK30X1/2 >
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK30X3/4 >
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK30X5/8 >
SINGLE GROOVE 7/8" -ID A-BELT SHEAVES-BRWAK30X7/8 >
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK32X1/2 >
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK32X3/4 >
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK32X5/8 >
SINGLE GROOVE 7/8" -ID A-BELT SHEAVES-BRWAK32X7/8 >
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK34X1/2 >
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK34X3/4 >
AK-34X5/8 Single Groove 5/8" -ID A-belt
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK34X5/8 >
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK39X3/4 >
Recently Viewed
2-AK-54X1-3/8 2-grv Cast Iron Sheave With Split Taper Bushing 1-3/8" Bore, Uses 4l
2-GRV CAST IRON SHEAVE WITH SPLIT TAPER BUSHING 1-3/8" BORE, USES 4L OR A-BELT-BRW2AK54X13/8 >
Koyo LM501314 Bearing Cup, 73.431 mm OD, 16.604 mm W Cup, 21.43 mm W Bearing, 70 mm Dia Max House Shoulder
Koyo LM501314 Bearing Cup, 73.431 mm OD, 16.604 mm W Cup, 21.43 mm W Bearing, 70 mm Dia Max House Shoulder
1-1/2" -FEMALE PIPE THREAD SCH-80 BLACK TEE-JPW11/2XHBT >
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Truflex® 4L180 Light Duty V-Belt, 4L Section, 1/2 in W Top, 18 in L Outside, 5/16 in THK
Engineered with all the qualities of a great belt, including flexibility, durability and resistance to contaminants. It includes a thin profile, designed for small-diameter sheaves and a lower cord positioning to improve belt performance on light-duty belt drives and in your backside idler applications.
1/4" X 4-1/4" CENTER PUNCH-ARS70231 >
