OIL SEALS
CHICAGO RAWHIDE 99435 Speedi-sleeves-4.328"-shaft
SPEEDI-SLEEVES-4.328"-SHAFT SIZE
CHICAGO RAWHIDE 99601 Speedi-sleeves-6.000"-shaft
SPEEDI-SLEEVES-6.000"-SHAFT SIZE
CHICAGO RAWHIDE 9967 1.000" X 1.752" X .313"
1.000" X 1.752X.313" DOUBLE LIP, CRWA5 DESIGN, NITRILE RUBBER MATERIAL
CHICAGO RAWHIDE 9995 1.000" X 1.752x.250"
1.000" X 1.752X.250" RADIAL SHAFT, SINGLE LIP, SOLID OIL SEAL. NITRILE RUBBER MATERIAL, HM21 DESIGN
CHICAGO RAWHIDE 9997 1.000" X 1.752x.250"
1.000" X 1.752X.250" RADIAL SHAFT, SINGLE LIP, SOLID OIL SEAL
CHICAGO RAWHIDE 9998 1.000" X 1.752" X.250"
1.000" X 1.752X.250" RADIAL SHAFT, DOUBLE LIP, SOLID OIL SEAL. NITRILE RUBBER MATERIAL, CRWA1 DESIGN.
CHICAGO RAWHIDE16117 1.625" X 2.437" X .313"
1.625" X 2.437" X .313" NITRILE LIP, SOLID, OIL SEAL. STEEL CASE, CARBON STEEL GARTER LIP RETAINER-CHI16117 >
CHICAGO WAREHIDE 12458 1.250" X 2.000" X .250"
1.250" X 2.000" X .250" OIL SEAL-CHI12458 >
CHICGO RAWHIDE 23839 2.375" X 3.623" X .438"
2.375" X 3.623" X .438" RADIAL SHAFT, SINGLE LIP OIL SEAL.
CJICAGO RAWHIDE 29865 3.000" X 3.751" X .375"
3.000" X 3.751" X .375" RADIAL SHAFT SEAL WITH METAL CASE AND SKF WAVE LIP CRW BLACK 3D
CR SEALS 17633 Oil Seals-1.750" X 2.830" X .375"
OIL SEALS-1.750" X 2.830" X .375"-CHI17633>
Recently Viewed
Browning® 1296367 T35L Automatic Torque Limiter, 5/8 in Finished Bore, 3-1/2 in OD, 1800 in-lb (1-Spring)/3000 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Milwaukee® 0886-20 Cordless Jobsite Fan, 18 V DC, 3 Speeds, 284 cfm Air Flow
The M18 Jobsite Fan provides the most powerful airflow, and unmatched run-time in a compact size. The 0886-20 can circulate air over 40 Ft., making it ideal for drying or cooling on a variety of jobsites. Powered by the M18 REDLITHIUM battery the Jobsite Fan delivers up to 17 hours of run-time on low* for all day run-time on a single battery charge. This Jobsite Fan features a 120-degree adjustable head, 9 stopping positions, and 3 speed settings which provide optimal airflow control. The 0886-20 also includes an AC adapter for extended run time. *17 hours with a M18 REDLITHIUM XC 5.0 battery (batteries and charger sold separately).
1/4" -S FLAT FAUCET WASHERS-RADW146 >
BBI 898442 Wood Screw, #12, 1-3/4 in OAL, Flat Head, Phillips® Drive, Zinc CR+3
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
