OIL SEALS
20560 Oil Seals-2.063" X 2.750" X .313"
OIL SEALS-2.063" X 2.750" X .313"-CHI20530>
20586 Oil Seals-2.063" X 2.997" X .438"
OIL SEALS-2.063" X 2.997" X .438"-CHI20586>
20608 Oil Seals-2.063" X 3.000" X .313"
OIL SEALS-2.063" X 3.000" X .313"-CHI20608>
20608 Oil Seals-2.063" X 3.000" X .313"
OIL SEALS-2.063" X 3.000" X .313"-IMS20608>
2063037-TBH 2.062" X 3.000" X .375"
2.062" X 3.000" X .375" OIL SEALS-TCM2063037TBH >
20643 Oil Seals-2.063" X 3.061" X .313"
OIL SEALS-2.063" X 3.061" X .313"-CHI20643>
20702 Oil Seals-2.063" X 3.189" X .375"
OIL SEALS-2.063" X 3.189" X .375"-IMS20702>
20702 Oil Seals-2.063" X 3.189" X .375"
OIL SEALS-2.063" X 3.189" X .375"-CHI20702>
20900 high-capacity metric rotary shaft oil seal
• Shaft Diameter (Inside Diameter): 40.00 mm (1.575 inches)
• Housing Bore (Outside Diameter): 80.00 mm (3.150 inches)
• Seal Width (Thickness): 12.00 mm (0.472 inches)
20965 Oil Seals-2.094" X 3.149" X .550"
OIL SEALS-2.094" X 3.149" X .550"-IMS20965>
20X40X7-CRW-1-V .787" X 1.575" X .276
.787" X 1.575" X .276 OIL SEAL-CHI20X40X7CRW1V >
Recently Viewed
Dichtomatik N70114 O-Ring, 114 Dash Number, 0.612 in ID x 0.818 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dichtomatik 75102227 O-Ring, 329 Dash Number, 1.975 in ID x 2.395 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
2" X 120" 2-PLY FLAT-EYE NYLON SLING - SWC21020 >
Dodge® 117089 Stock Bore Taper Lock Bushing, 7/8 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
Dodge® 023001 103 Type E-Xtra Pillow Block Roller Bearing Unit, 1-1/4 in Dia Bore, 4.75 to 4.81 in L Bolt Center-to-Center, 1-1/2 in Base to Bore Centerline, 6 in OAL x 3 in OAH
Dodge® 023001 103 Type E-Xtra Pillow Block Roller Bearing Unit, 1-1/4 in Dia Bore, 4.75 to 4.81 in L Bolt Center-to-Center, 1-1/2 in Base to Bore Centerline, 6 in OAL x 3 in OAH
1.875" X 2.875" X .313" OIL SEALS-NAT473238>
