OIL SEALS
OIL SEALS-2.125" X 2.891" X .250"-CHI21121>
OIL SEALS-2.125" X 2.891" X .250"-IMS21121>
2.125" X 2.997" X .438" OIL SEAL-CHI21134 >
OIL SEALS-2.125" X 2.997" X .438"-IMS21136>
Shaft Diameter (Inner Diameter): 2.125 inches (2-1/8") Housing Bore (Outside Diameter): 3.000 inches (3") Overall Width (Thickness): 0.250 inches (1/4") Seal Design Type: HM21Lip Material: Nitrile Rubber (NBR)Max Pressure Tolerance: 3 psi Operating Temperature Range: -40°F to 210°F
OIL SEALS-2.125" X 3.000" X .250"-IMS21159>
2.125" X 3.000" X .313" OIL SEAL-CHI21167 >
2.125" X 3.000" X .438" OIL SEAL - CHI21171>
2.125" X 3.061" X .438" OIL SEAL - CHI21203>
2.125" X 3.061" X .250" OIL SEAL - CHI21208>
2.125" X 3.061" X .500" OIL SEAL-CHI21210 >
OIL SEALS-2.125" X 3.061" X .500"-IMS21210>
2.125" X 3.061" X .500" OIL SEAL - CHI21213>
OIL SEALS-2.125" X 3.061" X .500"-IMS21213>
2.125" X 3.125" X .438" OIL SEAL-CHI21234 >
2.125" X 3.189" X .250" OIL SEAL - CHI21265>
2.125" X 3.189" X .375" OIL SEAL - CHI21267>
OIL SEALS-2.125" X 3.189" X .375"-IMS21267>
TCM21275TB>
TCM21282VB>
2.125" X 2.875" X .438" OIL SEAL - TCM21284SA>
TCM21284TB>
TCM21293VTBH>
TCM21294SA>
Recently Viewed
Square Dâ„¢ QO120GFI Class A Ground Fault Miniature Circuit Breaker, 120 V AC, 20 A, 10 kA Interrupt, 1 Poles, Thermal Magnetic Trip
QO and QOB one, two and three pole thermal magnetic circuit breakers provide overcurrent protection and switching on ac and dc systems. These circuit breakers have an over center, trip free toggle mechanism with quick make, quick break action and positive handle indication. They also have VisiTrip trip indication, which provides a visual indication that the circuit breaker has tripped and interrupted the circuit. A full line of features and factory installed accessories are also available such as shunt trips, auxiliary switches and alarm switches. This 1 pole QO circuit breaker is rated at 20A at 120VAC. This unit provides 10kA breaking capacity and plug in mounting. This product includes a 6mA ground fault A with pigtail. QO circuit breakers are UL Listed under UL File E84967 and are CSA Certified under CSA Master Contract 153555.
Proto® DuraTek™ JCP1804R Screwdriver, 1/8 in Cabinet/Slotted Point, Alloy Steel Shank, 7-5/16 in OAL, Black Oxide/Polished Chrome, ASME B107.15
3/16" X 10" CABINET TIP ROUND SHANK SCREWDRIVER-ARS66270 >
MORSE® 11362 1340 General Purpose Jobber Length Drill Bit, #70 Drill - Wire, 0.028 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 6mm (1/4") Diameter.
