OIL SEALS
1-0421 CHICAGO RAWHIDE greaseable Premium Universal Joint
• Component Type: Greaseable Universal Joint
• Bearing Cap Diameter: 1.062 in (1-1/16")
• Lock-Up Distance (Width): 2.938 in
10 Oil Seals-.394" X 1.575" X .276"
OIL SEALS-.394" X 1.575" X .276"-CHI10X40X7HMS4R>
100042 10.00" X 11.00" X .375" Oil Seal - Chi100042
10.00" X 11.00" X .375" OIL SEAL - CHI100042
100X120X10-TC 3.937" X 4.724" X .394" Oil
3.937" X 4.724" X .394" OIL SEAL - TCM100X120X10TC>
100X130X12-TC 3.937" X 5.118" X .472"
3.937" X 5.118" X .472" OIL SEALS-TCM100X130X12TC >
Recently Viewed
BLACK SILICONE TAPE-GNT66260 >
RUS-KIL RUST INHIBITING FLAT WHITE SPRAY PAINT-BLP1020S >
The CBC-801 is a basic on-off power supply that provides full voltage to a 90 VAC clutch or brake and is activated by an external switch. This type of power supply is sufficient for many clutch/brake applications. These on-off controls (6001-448-004) feature 2 channels and an input of 120 VAC, 50/60 Hz.
Rust-Oleum 1-GALLON FLAT TRAFFIC-YELLOW PAINT RUS 2348-402
Paint or refresh parking lots, stadiums, athletic facilities and more with Rust-Oleum High Performance 2300 System Traffic Zone Striping Paint. Apply this weather-resistant coating to concrete, gravel or pavement for durability you can count on.
RUS-KIL JOHN DEERE GREEN SPRAY-BLP1045S >
Browning® 1296458 T45L Automatic Torque Limiter, 1-3/16 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
