OIL SEALS
2.250" X 3.350" X .375" RADIAL SHAFT, SINGLE LIP, SOLID OIL SEAL
2.250" X 3.310" X .375" SMALL BORE SEALS
2.250" X 3.251" X .438" DOUBLE LIP WITH SPRING OIL SEAL
RADIAL SHAFT, DOUBLE LIP OIL SEALS-2.250" X 3.251" X .375"-CHI22441>
2.250" X 3.250" X .270"RADIAL SHAFT, EXTERNAL LIP SEAL WITH SPRING, OIL SEAL-CHI22430 >
2.250" X 3.125" X .500"RADIAL SHAFT, SINGLE LIP OIL SEAL-CHI22407 >
2.250" X 3.125" X .375" DUAL LIP SHAFT SEAL WITH SPRING OIL SEAL-CHI22400 >
22392 Single Lip Grease Seal, I.D. 2.25 in, O.D. 3.061 in, Thickness 0.25 in
Chicago Rawhide (SKF) Radial Shaft Seal 22391
Double Lip Oil Seal - Solid
2.250" Shaft
3.061" Outside Diameter
0.438" Width
Nitrile Rubber Material
CRWHA1 Design
Single Lip Shaft Seal with Spring
2.25 in Shaft Diameter
3.061 in Housing Bore
0.375 in Overall Width
Nitrile Rubber (NBR) Lip Material
SKF Wave Seal
RADIAL SHAFT SEAL WITH METAL CASE AND SINGLE SEALING LIP 2.250" X 3.000" X .250"-CHI22368>
2.250" X 3.000" X .375"RADIAL SHAFT, DOUBLE LIP OIL SEAL-CHI22361 >
2.250" X 3.000" X .438"SMALL BORE RADIAL SHAFT SEAL-CHI22359 >
2.250" X 3.000" X .375" RADIAL SHAFT, DOUBLE LIP OIL SEAL-CHI22354 >
2.250" X 3.000" X .375"RADIAL SHAFT, SINGLE LIP OIL SEAL-CHI22353 >
2.250" X 2.875" X .313" RADIAL SHAFT, METAL CASE OIL SEAL - CHI22328>
2.250" X 2.875" X .250" SMALL BORE OIL SEAL-CHI22325 >
2.188X3.371" X .438" RADIAL SHAFT, SINGLE LIP, SOLID OIL SEAL-CHI21910 >
2.188X3.251" X .438" SINGLE LIP OIL SEALS-CHI21840 >
RADIAL SHAFT, SINGLE LIP OIL SEALS-2.188" X 3.000" X .500"-CHI21764>
2.188" X 3.000" X .375" RADIAL SHAFT, DOUBLE LIP OIL SEAL - CHI21763>
2.188X3.000" X .375" NITRILE RUBBER LIP MATERIAL, OIL SEAL-CHI21759 >
2.165" X 3.937" X .315"JOINT RADIAL BORE CRW1 OIL SEALS -CHI21685 >
2.165" X 3.543" X .315" TRANS OIL SEAL - CHI21670>
Recently Viewed
ALAN 14-THHN BLACK STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE14THHNBLK >
FLEETGUARD OPTI AIR FILTER, RADIAL SEAL OUTER AIR ELEMENT-FLTAF26124 >
ALAN 12-THHN ORANGE STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
ALE12THHNORG >
.901" INTERNAL RETAIN/SNAP RINGS
2" BLACK PLASTIC QUICK LINKS-TCI07263 >
SelkirkĀ® by Duravent Ultra-TempĀ® 208800 Type HT Round Top, Fits Duct Size: 10 in, 16 in W x 7 in H Cap
Part of the chimney system roof assembly, the Round Top is designed with a dome to exclude rain and leaves and a lower skirt to deflect wind for proper chimney draft. In the Sure-Temp-Type HT Chimney (5, 6, 7 and 8 in sizes) the Round Top is designed with three legs that slide down over the outside of the chimney. A cinch band is then positioned over the legs and tightened to hold the top firmly in place. This design makes cap removal for cleaning a breeze. In the 10, 12 and 14 in sizes, the Round Top is designed with a squeeze collar that fits inside the chimney pipe. The squeeze collar expands as a set screw is tightened to hold the top firmly in place.
