OIL SEALS
OIL SEALS-1.781" X 2.126" X .250"-CHI17802>
OIL SEALS-TYPE J--FLANGE SEALS-IMS17792>
17792 Oil Seals a high-quality radial shaft oil seal designed primarily for automotive wheel-end assemblies and compact industrial gear drive
• Shaft Diameter (Inside Diameter): 1.772 inches (45.0 mm)
• Housing Bore (Outside Diameter): 2.835 inches (72.0 mm)
• Seal Width (Thickness): 0.228 inches (5.8 mm)
• Lip Material: Nitrile Rubber (NBR / Buna-N)
OIL SEALS-NAT17789>
1.772" X 2.520" X .354" OIL SEAL - CHI17789>
OIL SEALS-1.772" X 2.480" X .294"-IMS17788>
1.772" X 2.480" X .294" OIL SEAL - CHI17788>
1.772" X 2.500" X .432" OIL SEAL - CHI17787>
OIL SEALS-1.770" X 2.364" X .427"-CHI17781>
OIL SEALS-1.770" X 2.364" X .427"-IMS17781>
1.772X2.835" X .315" OIL SEAL-CHI17778 >
1.772X2.835" X .393 OIL SEAL-CHI17776 >
OIL SEALS-1.772" X 2.835" X .315"-CHI17773>
1.772X2.677" X .315" OIL SEAL-CHI17766 >
1.772X2.559" X .315" OIL SEAL-CHI17762 >
1.772X2.559" X .315" OIL SEAL-CHI17759 >
OIL SEALS-1.772" X 2.677" X .354"-CHI17758>
1.772X2.559" X .197" OIL SEAL-CHI17757 >
1.750" X 3.543X.438" OIL SEAL-CHI17756 >
OIL SEALS-1.772" X 2.370" X .315"-CHI17752>
OIL SEALS-1.747" X 3.233" X .335"-IMS17748>
OIL SEALS-1.7447" X 3.233" X .335"-CHI17748>
OIL SEALS-1.739" X 3.000" X .500"-IMS17727>
OIL SEALS-1.750" X 3.061" X .375"-IMS17718>
Recently Viewed
Dichtomatik 67004150 O-Ring, 20 mm ID x 26 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom H-3X20
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
