OIL SEALS
38730 Oil Seals-3.875" X 5.251" X .438"
OIL SEALS-3.875" X 5.251" X .438"-IMS38730>
38709 Scotseals-3.875" X 5.129" X .844"
SCOTSEALS-3.875" X 5.129" X .844"-IMS38709>
38708 a heavy-duty industrial import oil seal distributed through commercial supply networks l
Radial/Deep Groove Ball Bearing features 0.7500 in bore diameter, straight bore, open closure, 1.5625 in outside diameter, and 0.4680 in width
38669 Oil Seals-3.875" X 4.876" X .500"
OIL SEALS-3.875" X 4.876" X .500"-IMS38669>
38555-VSU-A-2 3.875" X 5.500" X .500" Oil
3.875" X 5.500" X .500" OIL SEAL - TCM38555VSUA2>
38474-SA 3.875" X 4.751" X .438" Oil
3.875" X 4.751" X .438" OIL SEAL - TCM38474SA>
38220 Oil Seals-3.813" X 5.251" X .469"
OIL SEALS-3.813" X 5.251" X .469"-IMS38220>
37525 Oil Seals-3.750" X 4.999" X .375"
OIL SEALS-3.750" X 4.999" X .375"-IMS37525>
Recently Viewed
W-1-7/8 1-7/8"-ID is a single-direction thrust ball bearing
• Bore Diameter (d): 1-7/8 inches (1.875 in / 47.63 mm)
• Outside Diameter (D): 2-13/16 inches (2.8125 in / 71.44 mm)
• Height / Width (T): 3/4 inch (0.750 in / 19.05 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
Weldwood® original contact cement is a premium quality, brush grade, neoprene based contact cement that meets the stringent requirements of the professional user.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
18" IMPORT BOLT CUTTERS-JWH310942>
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
H K PORTER 0390MC Industrial Grade Bolt Cutter, 9/16 in Soft/Medium Hard Materials Cutting, 36 in OAL, Center Cut, Drop Forged Alloy Steel Jaw
Since 1880, Crescent H.K. Porter has been the preeminent brand in industrial cutters with a worldwide reputation for quality, strength, and durability. The extensive line of products includes manual cutters, pneumatic cutters, and accessories, designed to handle everything from light wires and brushes to heavy steel rods and bars.
