VI-300-063 V-type Idler Pulley 35300050
V-TYPE IDLER PULLEY 35300050 - PHOVI300063 >
Recently Viewed
V-TYPE IDLER PULLEY 35300050 - PHOVI300063 >
RIDGID® 33927 345/150DL Manual Flare Tool, 3/16 to 5/8 in Nominal, Sliding T-Handle Handle
RIDGID® 33927 345/150DL Manual Flare Tool, 3/16 to 5/8 in Nominal, Sliding T-Handle Handle
Dichtomatik 75102232 O-Ring, 334 Dash Number, 2.6 in ID x 3.02 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
2.000" X 3.000" X .375" OIL SEAL - CHI20002>
Alemite® 340067 Replacement Hose With Spring Guards, 36 in L, 10000 psi Operating, 1/8 in NPT
Alemite® 340067 Replacement Hose With Spring Guards, 36 in L, 10000 psi Operating, 1/8 in NPT
Browning® 1073477 QD Bushing, 2-5/8 in Dia Bore, 3-13/16 in Dia Barrel, 6 in Dia Flange, 2.64 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
