2517X1-15/16 1-15/16" -ID 2517-style Taper-lock
1-15/16" -ID 2517-STYLE TAPER-LOCK BUSHING-BRW2517X115/16 >
Recently Viewed
1-15/16" -ID 2517-STYLE TAPER-LOCK BUSHING-BRW2517X115/16 >
Hougen® Rotabroach® 12218 12000 Annular Cutter, 9/16 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Gates® Power Transmission Tri-Power® PowerBand® 3/BX42 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 45.6 in L Outside, 13/32 in THK, EPDM
Built for superior performance on heavy duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back side idler drives.
250-ML #266 HIGH TEMP THREADLOCKER-LOC26774 >
BBI 588463 Fully Threaded Machine Screw, #10-24, 2 in OAL, Round Head, Zinc CR+3 Plated, Phillips® Drive
BBI 588463 Fully Threaded Machine Screw, #10-24, 2 in OAL, Round Head, Zinc CR+3 Plated, Phillips® Drive
Milwaukee® M18™ FUEL™ 2737B-20 Barrel Grip Cordless Jig Saw, 18 V DC, For Blade Shank: T-Shank, 9.13 in OAL, Li-Ion Battery
The M18™ FUEL™ barrel grip jig saw combines power, blade speed and precision, to provide the highest quality cuts in a wide variety of materials. The M18™ FUEL™ D-handle jig saw leverages the POWERSTATE brushless motor and REDLINK Plus™ intelligence to provide higher blade speed than corded jig saws at 3500 strokes per minute for clean controlled cuts with minimized chipping or bucking. Leveraging the M18™ REDLITHIUM™ XC5.0 battery the M18™ FUEL™ D-handle jig saw provides up to 105 linear feet of cutting in 3/4 in. laminated particle board, delivering all day productivity with less trips to the charger. The saw features tool-less blade change, tool free bevel adjust with pin detent at 0°; 15°; 30°; and 45° as well as an LED light and on/off blower to keep the cut line visible while cutting.
