1108X1-1/8 1-1/8" -ID 1108-style Taper-lock
1-1/8" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X11/8 >
Recently Viewed
1-1/8" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X11/8 >
Dichtomatik N70107 O-Ring, 107 Dash Number, 0.206 in ID x 0.412 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
DRILLCO 21PS120C 2100PS Super High Performance Spiral Point Tap, Right Hand Cutting, 5/16-18 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Uncoated, HSS
These taps are designed for machine tapping in a wide range of material groups, including difficult to machine materials such as stainless steel. The Nitro multi-application spiral point tap improves thread quality, and aids in chip evacuation.
13/16" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X13/16 >
2-15/16" -ID 4-BOLT FLANGE UNIT-BRWVF4E247 >
Dichtomatik 67024982 O-Ring, 7.8 mm ID x 11.6 mm OD, FKM, 80 Shore A Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
