PIX SPA-1757 STANDARD V-BELT; SECTION SPA, 1757.00 MM OUTSIDE LENGTH, 13.00 MM BELT WIDTH, 1 RIB
THESE BELTS ARE USED PRIMARILY ON ALL NEW DRIVES BECAUSE OF SPACE SAVINGS ACHIEVED BY USING THESE BELTS. THEIR USE IS IN ALL INDUSTRIAL APPLICATIONS FROM LIGHT DUTY DRIVES AS THOSE FOR PUMPS TO HEAVILY LOADED STONE CRUSHER DRIVES. IN WEDGE BELT DRIVES, BANDED BELTS CAN BE REPLACED BY SINGLE BELTS WITHOUT CHANGING THE PULLY CONFIGURATION. OIL RESISTANT, ANTISTATIC .
-PIXSPA1757 >
Recently Viewed
PIX SPA-1757 STANDARD V-BELT; SECTION SPA, 1757.00 MM OUTSIDE LENGTH, 13.00 MM BELT WIDTH, 1 RIB
THESE BELTS ARE USED PRIMARILY ON ALL NEW DRIVES BECAUSE OF SPACE SAVINGS ACHIEVED BY USING THESE BELTS. THEIR USE IS IN ALL INDUSTRIAL APPLICATIONS FROM LIGHT DUTY DRIVES AS THOSE FOR PUMPS TO HEAVILY LOADED STONE CRUSHER DRIVES. IN WEDGE BELT DRIVES, BANDED BELTS CAN BE REPLACED BY SINGLE BELTS WITHOUT CHANGING THE PULLY CONFIGURATION. OIL RESISTANT, ANTISTATIC .
-PIXSPA1757 >
MORSE® 38126 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M20x1.5 Thread, D6 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
MORSE® 38126 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M20x1.5 Thread, D6 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
BBI 847242 Partially Threaded Cap Screw, 7/16-14, 4 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 847242 Partially Threaded Cap Screw, 7/16-14, 4 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
250-WATT QUARTZ BULB 79-MM 1508-A-BUL250T3QCL >
Gates® Power Transmission Super HC® 8V2360 Banded Heavy Duty V-Belt, 8V Section, 1 in W Top, 236 in L Outside, 7/8 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HCâ„¢ V-belts also have exclusive Gates construction features for longer life on your drives.
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
