V-BELTS COGGED BANDED 3VX-5VX-8VX
770-L-12 JASON INDUSTRIAL PRODUCTS
12-RIB POLY-V V-BELT-JAS770L12 >
8/5-VX-710 8-groove Banded 5-vx-710 V-belt
8-GROOVE BANDED 5-VX-710 V-BELT - GAT8/5VX710>
8/B-148 8-grv Banded B-148
8-GRV BANDED B-148 V-BELT-GAT8/B148 >
9/5-VX-710 9-groove Banded 5-vx-710 V-belt
9-GROOVE BANDED 5-VX-710 V-BELT - GAT9/5VX710>
PIX 3-VX-450/02 COGGED WEDGE BANDED V-BELT. 3/8" X 45" OC, 43 " INSIDE LENGTH, 2 RIBS
MADE OF RUBBER CUSHION; POLYESTER CABLE CORD AS REINFORCEMENT AND RUBBER IMPREGNATED WOVEN COTTON-POLYESTER FABRIC. USED WHERE HORSE POWER CAPACITY OR OUTPUT IS NEEDED, WHEN SINGLE OR MULTIPLE DRIVES ARE IMPRACTICAL DUE TO LIMITED SPACE. USED WHERE BELT VIBRATION OR BELT WHIP CAUSES UNSATISFACTORY RESULTS WHERE MULTIPLE CONVENTIONAL V-BELTS ARE INSTALLED
-PIX3VX450/02>
PIX 3-VX-1060/05 COGGED EDGE BANDED V-BELT, 3/8" X 106"X 5/16 IN THICKNESS, 1 RIB
THE 3VX1060/05 BANDED V BELT IS INTERCHANGEABLE WITH 5/3VX1060, 5-3VX1060 & 5GB3VX1060. WEDGE BELTS ARE ABLE TO PRODUCE MUCH HIGHER HORSEPOWER RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. THIS IS IMPROVED BY THE DIMENSIONAL CHANGES, SPECIAL TREATED POLYESTER CORD AS WELL AS OPTIMUM CORD PLACEMENT. BANDED V BELTS USE A HIGH STRENGTH TIE BAND THAT CREATES A PERMANENT MATCHED SET THROUGHOUT ALL BANDS, WHICH IMPROVES THE LOAD DISTRIBUTION.
- PIX3VX1060/05>
PIX 3-VX-1120/03 EQUIVALENT COGGED WEDGE BANDED V-BELT, 112" IN LENGTH, 3/8" WIDE
THE 3VX1120/03 BANDED V-BELT IS INTERCHANGEABLE WITH 3/3VX1120, 3-3VX1120,3R3VX1120 & 3GB3VX1120. WEDGE BELTS ARE ABLE TO PRODUCE MUCH HIGHER HORSEPOWER RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. GENERATES HIGHER HP RATINGS, NO WHIP, SLIPPAGE OR JUMP OFF UNDER HEAVY SHOCK LOAD. BETTER FLEXIBILITY ON SMALLER DIAMETER PULLEYS. ENHANCED HEAT DISSIPATION RATE.
PIX3VX1120/03>
PIX 3-VX-335/04 3VX SECTION WEDGE COGGED V-BELT; 3/8" X 33.5" OUTSIDE LENGTH, 4 BANDS
THE 3VX335/04 BANDED V-BELT IS INTERCHANGEABLE WITH 4/3VX335, 4-3VX335, 4R3VS335 & 4GB3VX335. WEDGE BELTS ARE ABLE TO PRODUCE MUCH HIGHER HORSEPOWER RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. GENERATES HIGHER HP RATINGS. NO WHIP, SLIPPPAGE OR JUMP OFF UNDER HEAVY SHOCK LOADS. BETTER FLEXIBILITY ON SMALLER DIAMETER PULLEYS, ENHANCED HEAT DISSIPATION RATE
-PIX3VX335/04 >
PIX 3-VX-400/02 WEDGE COGGED BANDED V-BELT. 3/8" TOP WIDTH X 40" OUTSIDE MEASUREMENT- 2 BANDS
VBANDED V-BELT IS INTERCHANGEABLE WITH 2/3VX400, 2-3VX400,2R3VX400 & 2GB3VX400. WEDGE BELTS ARE ABLE TO PRODUCE MUCH HIGHER HORSEPOWER RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH.
-PIX3VX400/02 >
PIX 3-VX-425/02 3VX BANDED COGGED BELT, OC LENGTH 3/8" X 42.5", DEPTH 21/64"
COGGED WDGE BANDED V-BELT REPLACEMENTS ARE EQUIVALENT TO OEM SPECIFICATIONS. 2 RIBS WITH A TOP WIDTH OF 3/8" X 42.5" OC V-BELT REPLACEMENTS BELTS EXCEED ALL PUBLISHED USA RMA RATING LEVELS.
- PIX3VX425/02>
PIX 3-VX-425/04 V-BELT, 3VX2, 3/8" X 42.5" OX, 4 BAND
COGGED WDGE BANDED V-BELT REPLACEMENTS ARE EQUIVALENT TO OEM SPECIFICATIONS. 2 RIBS WITH A TOP WIDTH OF 3/8" X 42.5" OC V-BELT REPLACEMENTS BELTS EXCEED ALL PUBLISHED USA RMA RATING LEVELS.
- PIX3VX425/04>
PIX 3VX560/05 OEM EQUIVALENT COGGED WEDGE BANDED V-BELT, 5 RIBS, 3/8" X 56" OC
MADE OF RUBBER CUSHION; POLYESTER CABLE CORD AS REINFORCEMENT AND RUBBER IMPREGNATED WOVEN COTTON-POLYESTER FABRIC. USED WHERE HORSE POWER CAPACITY OR OUTPUT IS NEEDED, WHEN SINGLE OR MULTIPLE DRIVES ARE IMPRACTICAL DUE TO LIMITED SPACE. USED WHERE BELT VIBRATION OR BELT WHIP CAUSES UNSATISFACTORY RESULTS WHERE MULTIPLE CONVENTIONAL V-BELTS ARE INSTALLED
-PIX3VX560/05>
PIX 5-VX-1000/4 RUBBER V-BELT, RAW EDGE/COGGED, BLACK 100" LENGTH X 0.62" WIDTH X 0.53" HEIGHT, 4 BANDS
ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS
- PIX5VX1000/04>
PIX 5-VX-1320/05 RUBBER V-BELT, RAW EDGE/COGGED, BLACK 132" LENGTH X 0.50" WIDTH X 35/64" HEIGHT, 5 RIBS
ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS
-PIX5VX1320/05 >
PIX 5-VX-1320/06 RUBBER V-BELT, RAW EDGE/COGGED, BLACK 132" LENGTH X 0.50" WIDTH X 35/64" HEIGHT, 6 RIBS
ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS
- PIX5VX1320/06>
PIX 5-VX-140/05 RUBBER V-BELT, RAW EDGE/COGGED, BLACK 140" LENGTH X 0.63" WIDTH X 0.53" HEIGHT, 5 RIBS
ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS
-PIX5VX1400/05>
PIX 5-VX-1500/04 RUBBER V-BELT, RAW EDGE/COGGED, BLACK 150" LENGTH X 0.63" WIDTH X 0.53" HEIGHT, 4 RIBS
ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS
- PIX5VX1500/04>
PIX 5-VX-630/04 RUBBER V-BELT, RAW EDGE/COGGED, BLACK 63 " OC, 5/8" TOP WIDTH, 17/32" THICKNESS, 4 RIB
ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS
-PIX5VX630/04 >
PIX 5-VX-750/03 RUBBER V-BELT, RAW EDGE/COGGED, BLACK 75 " OC, 5/8" TOP WIDTH, 35/64" THICKNESS, 3 RIB
ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS
-PIX5VX750/03>
PIX 5-VX-850/03 RUBBER V-BELT, RAW EDGE/COGGED, BLACK 85 " OC, 5/8" TOP WIDTH, 17/32" THICKNESS, 3 RIB
ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS
-PIX5VX850/03 >
PIX 5-VX-900/05 RUBBER V-BELT, RAW EDGE/COGGED, BLACK 90 " OC, 5/8" TOP WIDTH, 17/32" THICKNESS, 3 RIB
ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS-PIX5VX900/05 >
PIX V-BELT, 3-VX-600/04 COGGED, 3/8" X 63" OC INDUSTRIAL BELT, 4 RIBS
3V SECTION BANDED, DURABLE CONSTRUCTION: CRAFTED FROM HIGH-STRENGTH POLYESTER CORD. VERSATILE USE; FINISHED IN BLACK AND ENGINEERED FOR CONSISTENT POWER TRANSMISSION IN A VARIETY OF HEAVY DUTY-SYSTEMS
- PIX3VX630/04>
Recently Viewed
1-1/4" X 2-1/2" SCHEDULE 80 BLACK NIPPLE-FIT11/4X21/2XHBN >
BBI 101337 Socket Set Screw, 1/4-28, 1/4 in L, Cup Point, Alloy Steel
GEARWRENCH® 9120 Open End Regular Length Combination Wrench, 20 mm Wrench, 12 Points, 0/15 deg Offset, 11.476 in OAL, Polished Chrome
GEARWRENCH Original ratcheting wrenches combine the speed of a ratchet with the access and control of a wrench. They offer the ease of 5 degrees of movement to turn fasteners, versus 30 degrees on standard combination wrenches. The small ratcheting box end head design enables access to tight spots where a ratchet won't fit. The open end allows for easier access on tough to reach spots, making jobs go faster and easier. This set is a great addition to any mechanic tools collection.
JASON A86 4L/880 V-BELT, A/4L SECTION, NATURAL RUBBER/SBR/POLYESTER, 88" OUTSIDE LENGTH 1/2" TOP WIDTH 11/32" THICK
MADE OF NATURAL RUBBER/SBR THE CORD IS POLYESTER AND THE COVER IS COTTON/POLYESTER BLEND. 88" OUTSIDE LENGTH, 1/2" TOP WIDTH, 11/32" THICK V-BELT. CONFORMS TO ARPM STANDARDS
-JASA86 >
V-BELTS-BRW5V710>
5/16" -ID SOLID SHAFT COLLAR
