V-BELTS COGGED BANDED 3VX-5VX-8VX

12-RIB POLY-V V-BELT-JAS770L12 >

8-GROOVE BANDED 5-VX-710 V-BELT - GAT8/5VX710>

8-GRV BANDED B-148 V-BELT-GAT8/B148 >

9-GROOVE BANDED 5-VX-710 V-BELT - GAT9/5VX710>

4-GRV BANDED A-60 V-BELTS -PIXA60/04 >

2-GRV BANDED B-90 V-BELTS-PIXB90/02>

MADE OF RUBBER CUSHION; POLYESTER CABLE CORD AS REINFORCEMENT AND RUBBER IMPREGNATED WOVEN COTTON-POLYESTER FABRIC. USED WHERE HORSE POWER CAPACITY OR OUTPUT IS NEEDED, WHEN SINGLE OR MULTIPLE DRIVES ARE IMPRACTICAL DUE TO LIMITED SPACE. USED WHERE BELT VIBRATION OR BELT WHIP CAUSES UNSATISFACTORY RESULTS WHERE MULTIPLE CONVENTIONAL V-BELTS ARE INSTALLED
-PIX3VX450/02>

THE 3VX1060/05 BANDED V BELT IS INTERCHANGEABLE WITH 5/3VX1060, 5-3VX1060 & 5GB3VX1060. WEDGE BELTS ARE ABLE TO PRODUCE MUCH HIGHER HORSEPOWER RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. THIS IS IMPROVED BY THE DIMENSIONAL CHANGES, SPECIAL TREATED POLYESTER CORD AS WELL AS OPTIMUM CORD PLACEMENT. BANDED V BELTS USE A HIGH STRENGTH TIE BAND THAT CREATES A PERMANENT MATCHED SET THROUGHOUT ALL BANDS, WHICH IMPROVES THE LOAD DISTRIBUTION.
- PIX3VX1060/05>

THE 3VX1120/03 BANDED V-BELT IS INTERCHANGEABLE WITH 3/3VX1120, 3-3VX1120,3R3VX1120 & 3GB3VX1120. WEDGE BELTS ARE ABLE TO PRODUCE MUCH HIGHER HORSEPOWER RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. GENERATES HIGHER HP RATINGS, NO WHIP, SLIPPAGE OR JUMP OFF UNDER HEAVY SHOCK LOAD. BETTER FLEXIBILITY ON SMALLER DIAMETER PULLEYS. ENHANCED HEAT DISSIPATION RATE.
PIX3VX1120/03>

THE 3VX335/04 BANDED V-BELT IS INTERCHANGEABLE WITH 4/3VX335, 4-3VX335, 4R3VS335 & 4GB3VX335. WEDGE BELTS ARE ABLE TO PRODUCE MUCH HIGHER HORSEPOWER RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. GENERATES HIGHER HP RATINGS. NO WHIP, SLIPPPAGE OR JUMP OFF UNDER HEAVY SHOCK LOADS. BETTER FLEXIBILITY ON SMALLER DIAMETER PULLEYS, ENHANCED HEAT DISSIPATION RATE
-PIX3VX335/04 >

VBANDED V-BELT IS INTERCHANGEABLE WITH 2/3VX400, 2-3VX400,2R3VX400 & 2GB3VX400. WEDGE BELTS ARE ABLE TO PRODUCE MUCH HIGHER HORSEPOWER RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH.
-PIX3VX400/02 >

COGGED WDGE BANDED V-BELT REPLACEMENTS ARE EQUIVALENT TO OEM SPECIFICATIONS. 2 RIBS WITH A TOP WIDTH OF 3/8" X 42.5" OC V-BELT REPLACEMENTS BELTS EXCEED ALL PUBLISHED USA RMA RATING LEVELS.
- PIX3VX425/02>

COGGED WDGE BANDED V-BELT REPLACEMENTS ARE EQUIVALENT TO OEM SPECIFICATIONS. 2 RIBS WITH A TOP WIDTH OF 3/8" X 42.5" OC V-BELT REPLACEMENTS BELTS EXCEED ALL PUBLISHED USA RMA RATING LEVELS.
- PIX3VX425/04>

MADE OF RUBBER CUSHION; POLYESTER CABLE CORD AS REINFORCEMENT AND RUBBER IMPREGNATED WOVEN COTTON-POLYESTER FABRIC. USED WHERE HORSE POWER CAPACITY OR OUTPUT IS NEEDED, WHEN SINGLE OR MULTIPLE DRIVES ARE IMPRACTICAL DUE TO LIMITED SPACE. USED WHERE BELT VIBRATION OR BELT WHIP CAUSES UNSATISFACTORY RESULTS WHERE MULTIPLE CONVENTIONAL V-BELTS ARE INSTALLED
-PIX3VX560/05>

ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS
- PIX5VX1000/04>

ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS
-PIX5VX1320/05 >

ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS
- PIX5VX1320/06>

ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS
-PIX5VX1400/05>

ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS
- PIX5VX1500/04>

ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS
-PIX5VX630/04 >

ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS
-PIX5VX750/03>

ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS
-PIX5VX850/03 >

ENERGY EFFICIENT BELTS DESIGNED TO USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS. BELT ANGLE IS 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS-PIX5VX900/05 >

3V SECTION BANDED, DURABLE CONSTRUCTION: CRAFTED FROM HIGH-STRENGTH POLYESTER CORD. VERSATILE USE; FINISHED IN BLACK AND ENGINEERED FOR CONSISTENT POWER TRANSMISSION IN A VARIETY OF HEAVY DUTY-SYSTEMS
- PIX3VX630/04>