V-BELTS COGGED BANDED 3VX-5VX-8VX
PIX 3-VX-1120/03 EQUIVALENT COGGED WEDGE BANDED V-BELT, 112" IN LENGTH, 3/8" WIDE
THE 3VX1120/03 BANDED V-BELT IS INTERCHANGEABLE WITH 3/3VX1120, 3-3VX1120,3R3VX1120 & 3GB3VX1120. WEDGE BELTS ARE ABLE TO PRODUCE MUCH HIGHER HORSEPOWER RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. GENERATES HIGHER HP RATINGS, NO WHIP, SLIPPAGE OR JUMP OFF UNDER HEAVY SHOCK LOAD. BETTER FLEXIBILITY ON SMALLER DIAMETER PULLEYS. ENHANCED HEAT DISSIPATION RATE.
PIX3VX1120/03>
PIX 3-VX-1060/05 COGGED EDGE BANDED V-BELT, 3/8" X 106"X 5/16 IN THICKNESS, 1 RIB
THE 3VX1060/05 BANDED V BELT IS INTERCHANGEABLE WITH 5/3VX1060, 5-3VX1060 & 5GB3VX1060. WEDGE BELTS ARE ABLE TO PRODUCE MUCH HIGHER HORSEPOWER RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. THIS IS IMPROVED BY THE DIMENSIONAL CHANGES, SPECIAL TREATED POLYESTER CORD AS WELL AS OPTIMUM CORD PLACEMENT. BANDED V BELTS USE A HIGH STRENGTH TIE BAND THAT CREATES A PERMANENT MATCHED SET THROUGHOUT ALL BANDS, WHICH IMPROVES THE LOAD DISTRIBUTION.
- PIX3VX1060/05>
PIX 3-VX-450/02 COGGED WEDGE BANDED V-BELT. 3/8" X 45" OC, 43 " INSIDE LENGTH, 2 RIBS
MADE OF RUBBER CUSHION; POLYESTER CABLE CORD AS REINFORCEMENT AND RUBBER IMPREGNATED WOVEN COTTON-POLYESTER FABRIC. USED WHERE HORSE POWER CAPACITY OR OUTPUT IS NEEDED, WHEN SINGLE OR MULTIPLE DRIVES ARE IMPRACTICAL DUE TO LIMITED SPACE. USED WHERE BELT VIBRATION OR BELT WHIP CAUSES UNSATISFACTORY RESULTS WHERE MULTIPLE CONVENTIONAL V-BELTS ARE INSTALLED
-PIX3VX450/02>
9/5-VX-710 9-groove Banded 5-vx-710 V-belt
9-GROOVE BANDED 5-VX-710 V-BELT - GAT9/5VX710>
8/B-148 8-grv Banded B-148
8-GRV BANDED B-148 V-BELT-GAT8/B148 >
8/5-VX-710 8-groove Banded 5-vx-710 V-belt
8-GROOVE BANDED 5-VX-710 V-BELT - GAT8/5VX710>
770-L-12 JASON INDUSTRIAL PRODUCTS
12-RIB POLY-V V-BELT-JAS770L12 >
7/5-VX-710 7-groove Banded 5-vx-710 V-belt
7-GROOVE BANDED 5-VX-710 V-BELT - GAT7/5VX710>
6/5-VX-710 6-groove Banded 5-vx-710 V-belt
6-GROOVE BANDED 5-VX-710 V-BELT - GAT6/5VX710>
6/5-VX-1320 6-grv Banded 5-v X-1320
6-GRV BANDED 5-V X-1320 V-BELT-GAT6/5VX1320 >
6/3-VX-950 6-groove Banded 3-vx-950 V-belt
6-GROOVE BANDED 3-VX-950 V-BELT - GAT6/3VX950>
6/3-V-400 6-grv Banded 3-v-400
6-GRV BANDED 3-V-400 V-BELT-GAT6/3V400 >
6-R-5-VX-900 JASON INDUSTRIAL PRODUCTS
5-GRV BANDED 5-V X-900 V-BELT-JAS6R5VX900 >
6-R-3-VX-850 JASON INDUSTRIAL PRODUCTS
6-GRV BANDED 3-V X-850 V-BELT-JAS6R3VX850 >
6-R-3-VX-630 JASON INDUSTRIAL PRODUCTS
6-GRV BANDED 3-V X-630 V-BELT-JAS6R3VX630 >
6-R-3-VX-530 JASON INDUSTRIAL PRODUCTS
6-GRV BANDED 3-V X-530 V-BELT-JAS6R3VX530 >
6-R-3-VX-400 JASON INDUSTRIAL PRODUCTS
6-GRV BANDED 3-V X-400 V-BELT-JAS6R3VX400 >
6-R-3-VX-335 JASON INDUSTRIAL PRODUCTS
BANDED V-BELT-JAS6R3VX335>
5/C-225 5-grv Banded C-225
5-GRV BANDED C-225 V-BELT-GAT5/C225 >
5/5-VX-850 5-grv Banded 5-v X-850
5-GRV BANDED 5-V X-850 V-BELT-GAT5/5VX850 >
5/5-VX-710 5-groove Banded 5-vx-710 V-belt
5-GROOVE BANDED 5-VX-710 V-BELT - GAT5/5VX710>
5/5-VX-670 5-grv Banded 5-v X-670
5-GRV BANDED 5-V X-670 V-BELT-GAT5/5VX670 >
Recently Viewed
Dodge® 117130 Stock Bore Taper Lock Bushing, 2-3/4 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
Extra reach for hard to reach grease fittings, Snaps directly onto a jaw-type coupler to reach grease fittings in very tight spaces, Works best with the LockNLube Grease Coupler, Delivers a fine line of grease for shafts and other applications, For hand operated grease guns, Choose your size LNL122 Narrow Needle Greasing Adapter Overall Length: 3.125 in or 80 mm, LNL222 XL Narrow Needle Greasing Adapter Overall Length: 7.5 in or 190.5 mm
GP® CH112 Chisel, 1-1/4 in Tip, 7-1/2 in OAL
Mayhew™ 60150 Ladyfoot Pry Bar Set, 3 Pieces, Alloy Steel
1" HOSEX1" CODE 62 FLANGE 90-DEG-MHDN1616FLH90 >
Proto® TorquePlus™ J5211 Standard Length Socket, Imperial, 3/8 in Square Drive, 11/32 in
