V-BELTS COGGED BANDED 3VX-5VX-8VX
PIX 3-VX-1120/03 EQUIVALENT COGGED WEDGE BANDED V-BELT, 112" IN LENGTH, 3/8" WIDE
THE 3VX1120/03 BANDED V-BELT IS INTERCHANGEABLE WITH 3/3VX1120, 3-3VX1120,3R3VX1120 & 3GB3VX1120. WEDGE BELTS ARE ABLE TO PRODUCE MUCH HIGHER HORSEPOWER RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. GENERATES HIGHER HP RATINGS, NO WHIP, SLIPPAGE OR JUMP OFF UNDER HEAVY SHOCK LOAD. BETTER FLEXIBILITY ON SMALLER DIAMETER PULLEYS. ENHANCED HEAT DISSIPATION RATE.
PIX3VX1120/03>
PIX 3-VX-1060/05 COGGED EDGE BANDED V-BELT, 3/8" X 106"X 5/16 IN THICKNESS, 1 RIB
THE 3VX1060/05 BANDED V BELT IS INTERCHANGEABLE WITH 5/3VX1060, 5-3VX1060 & 5GB3VX1060. WEDGE BELTS ARE ABLE TO PRODUCE MUCH HIGHER HORSEPOWER RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. THIS IS IMPROVED BY THE DIMENSIONAL CHANGES, SPECIAL TREATED POLYESTER CORD AS WELL AS OPTIMUM CORD PLACEMENT. BANDED V BELTS USE A HIGH STRENGTH TIE BAND THAT CREATES A PERMANENT MATCHED SET THROUGHOUT ALL BANDS, WHICH IMPROVES THE LOAD DISTRIBUTION.
- PIX3VX1060/05>
PIX 3-VX-450/02 COGGED WEDGE BANDED V-BELT. 3/8" X 45" OC, 43 " INSIDE LENGTH, 2 RIBS
MADE OF RUBBER CUSHION; POLYESTER CABLE CORD AS REINFORCEMENT AND RUBBER IMPREGNATED WOVEN COTTON-POLYESTER FABRIC. USED WHERE HORSE POWER CAPACITY OR OUTPUT IS NEEDED, WHEN SINGLE OR MULTIPLE DRIVES ARE IMPRACTICAL DUE TO LIMITED SPACE. USED WHERE BELT VIBRATION OR BELT WHIP CAUSES UNSATISFACTORY RESULTS WHERE MULTIPLE CONVENTIONAL V-BELTS ARE INSTALLED
-PIX3VX450/02>
2-GRV BANDED B-90 V-BELTS-PIXB90/02>
4-GRV BANDED A-60 V-BELTS -PIXA60/04 >
9/5-VX-710 9-groove Banded 5-vx-710 V-belt
9-GROOVE BANDED 5-VX-710 V-BELT - GAT9/5VX710>
8-GRV BANDED B-148 V-BELT-GAT8/B148 >
8/5-VX-710 8-groove Banded 5-vx-710 V-belt
8-GROOVE BANDED 5-VX-710 V-BELT - GAT8/5VX710>
12-RIB POLY-V V-BELT-JAS770L12 >
7/5-VX-710 7-groove Banded 5-vx-710 V-belt
7-GROOVE BANDED 5-VX-710 V-BELT - GAT7/5VX710>
6/5-VX-710 6-groove Banded 5-vx-710 V-belt
6-GROOVE BANDED 5-VX-710 V-BELT - GAT6/5VX710>
6-GRV BANDED 5-V X-1320 V-BELT-GAT6/5VX1320 >
6/3-VX-950 6-groove Banded 3-vx-950 V-belt
6-GROOVE BANDED 3-VX-950 V-BELT - GAT6/3VX950>
6-GRV BANDED 3-V-400 V-BELT-GAT6/3V400 >
5-GRV BANDED 5-V X-900 V-BELT-JAS6R5VX900 >
6-GRV BANDED 3-V X-850 V-BELT-JAS6R3VX850 >
6-GRV BANDED 3-V X-630 V-BELT-JAS6R3VX630 >
6-GRV BANDED 3-V X-530 V-BELT-JAS6R3VX530 >
6-GRV BANDED 3-V X-400 V-BELT-JAS6R3VX400 >
BANDED V-BELT-JAS6R3VX335>
5-GRV BANDED C-225 V-BELT-GAT5/C225 >
5-GRV BANDED 5-V X-850 V-BELT-GAT5/5VX850 >
5/5-VX-710 5-groove Banded 5-vx-710 V-belt
5-GROOVE BANDED 5-VX-710 V-BELT - GAT5/5VX710>
5-GRV BANDED 5-V X-670 V-BELT-GAT5/5VX670 >
Recently Viewed
Masterduct 363-200-107 Master-TPR PLUS Lightweight Suction and Transport Hose, 8 in Nominal, 25 ft L, Thermoplastic/Fabric/Steel
SUCTION AND TRANSPORT HOSE LIGHT/MEDIUM WEIGHT
FLASHLIGHT BULBS-GEAPR13>
OIL SEALS-1.940" X 2.909" X .516"-IMS19314>
Browning® 1080621 Type S2 Split-Taper Bushing, 3-15/16 in Dia Bore, 4.27 in Dia Small End/4-5/8 in Dia Large End Dia Barrel, 6-3/8 in Dia Flange, 6-3/4 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Simmons 7502 Check Valve, 3/4 in, Brass Body, Low Lead Compliance: Yes, Domestic
Simmons 7502 Check Valve, 3/4 in, Brass Body, Low Lead Compliance: Yes, Domestic
OIL SEALS-2.063" X 3.189" X .375"-IMS20702>
