JASON BX88 COGGED CLASSICAL V-BELTS. 21/32 " TOP WIDTH, 13/32 " THICK
RAW EDGE COGGED V-BELT; 21/32 WIDTH, 91" BELT OUTSIDE LENGTH, 1 BAND, POLYESTER TENSILE MATERIAL, RUBBER OUTER MATERIAL.
-JASBX88 >
Recently Viewed
JASON BX88 COGGED CLASSICAL V-BELTS. 21/32 " TOP WIDTH, 13/32 " THICK
RAW EDGE COGGED V-BELT; 21/32 WIDTH, 91" BELT OUTSIDE LENGTH, 1 BAND, POLYESTER TENSILE MATERIAL, RUBBER OUTER MATERIAL.
-JASBX88 >
JASON BX94 COGGED CLASSICAL V-BELTS. 21/32 " TOP WIDTH, 13/32 " THICK
RAW EDGE COGGED V-BELT; 21/32 WIDTH, 97" BELT OUTSIDE LENGTH, 1 BAND, POLYESTER TENSILE MATERIAL, RUBBER OUTER MATERIAL.
-JASBX94 >
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Dichtomatik N70432 O-Ring, 432 Dash Number, 5.35 in ID x 5.9 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dichtomatik S70011 O-Ring, 011 Dash Number, 0.301 in ID x 0.441 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
