BX-65 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE >68-JASBX65 >
Recently Viewed
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE >68-JASBX65 >
HCI Preferred Supplier 46932SS Mini Ball Valve, 3/8 in Nominal, MIP x FIP End Style, CF8/CF8M Stainless Steel Body, NBR Softgoods
HCI Preferred Supplier 46932SS Mini Ball Valve, 3/8 in Nominal, MIP x FIP End Style, CF8/CF8M Stainless Steel Body, NBR Softgoods
Dichtomatik 75102174 O-Ring, 252 Dash Number, 5.234 in ID x 5.512 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
DOUBLE SEALED BALL BEARING WITH SNAP RING-GULR62RSNR >
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
Browning® 3749892 Taper Lock Bushing, 1-1/2 in Dia Bore, 3-3/8 in Dia Barrel, 2-1/2 in OAL, Steel
