AX-50 PIX BELTS
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE 52-PIXAX50 >
Recently Viewed
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE 52-PIXAX50 >
Proto® J2624 Box End Wrench, 1-1/2 in Wrench, 12 Points, 21 in OAL, Alloy Steel, Black Oxide, Federal GGG-W-636E
Simpson Strong-Tie® LRU26Z Face-Mount Rafter Hanger, 2 x 6 in Joist, 18 ga, Steel, ZMAX® Galvanized
The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid sawn rafters, the LRUZ's unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners.
BBI 847434 Partially Threaded Cap Screw, 5/8-11, 2-1/4 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 847434 Partially Threaded Cap Screw, 5/8-11, 2-1/4 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
1/8" X 1-1/2" X 72 FLAT STEEL STOCK A36 mild carbon steel alloy. Common structural steel in U.S.A. Minimum yield of 36,000 PSI (250 MPa) and ultimate tensile strength of 58,000 to 80,000 PSI (400-550 MPa).
Dichtomatik S70427 O-Ring, 427 Dash Number, 4.725 in ID x 5.275 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
