JASON 3VX1060 V-BELT 3/8 X 106 IN. OUTSIDE CIRCUMFERENCE. RUBBER V-BELT, RAW EDGE/COGGED, BLACK
THIS ITEM IS OIL RESISTANCE, ANTI-STATIC, TOP WIDTH 3/8", DIESEL BELTING. GROUND FORM DESIGN REDUCES VIBRATION AND INCREASES BELT AND BEARING LIFE. GREATER BELT SIDEWALL AREA INCREASES HP CAPABILITIES. COVER ON TOP AND BOTTOM OF BELT INCREASE STABILITY AND LOWER CORD STRESS.
NOTCHED GRIP V-BELT >106."-JAS3VX1060 >
Recently Viewed
JASON 3VX1060 V-BELT 3/8 X 106 IN. OUTSIDE CIRCUMFERENCE. RUBBER V-BELT, RAW EDGE/COGGED, BLACK
THIS ITEM IS OIL RESISTANCE, ANTI-STATIC, TOP WIDTH 3/8", DIESEL BELTING. GROUND FORM DESIGN REDUCES VIBRATION AND INCREASES BELT AND BEARING LIFE. GREATER BELT SIDEWALL AREA INCREASES HP CAPABILITIES. COVER ON TOP AND BOTTOM OF BELT INCREASE STABILITY AND LOWER CORD STRESS.
NOTCHED GRIP V-BELT >106."-JAS3VX1060 >
Browning® 1045947 VP Series Type 5 Variable Pitch Sheave, 1-1/8 in Finished Bore, 4-3/4 in OD, 2 Grooves, 3.3 to 4.1 in (3L)/3.6 to 4.6 in (A/4L)/3.8 to 4.8 in (B/5L) Dia Pitch, 1-3/8 to 2-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
HCI Preferred Supplier 32058 Rigid Hose-to-Pipe Adapter, 3/8 x 1/4 in Nominal, Barb x FNPTF End Style, Brass
HCI Preferred Supplier 32058 Rigid Hose-to-Pipe Adapter, 3/8 x 1/4 in Nominal, Barb x FNPTF End Style, Brass
9/16"-18 X 3-1/2" X 8" U-BOLT WITH NUTS--CARD OF 2 - REDSP01100>
Irwin® Hanson® 8327 Straight Flute Tap, Right Hand Cutting, M6x1 Thread, Plug Chamfer, (4) Flutes, High Carbon Steel
Tap carded 6mm-1mm. Made of shock-resistant and heat treated S2 steel for maximum strength and hardness, ideal for maintenance and repair work, manufactured in United states.
Milwaukee® 49-57-0689 Tang Drive Annular Cutter, 11/16 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 11/16 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
