PIX A-53 IS A CLASSICAL V-BELT 55" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA53 >
Recently Viewed
PIX A-53 IS A CLASSICAL V-BELT 55" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA53 >
Browning® 1070192 Split Taper Bushing, 1-7/8 in Dia Bore, 3-7/8 in Small End/4 in Large End Dia Barrel, 5-3/8 in Dia Flange, 2-7/8 in OAL, Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
5" X 1-1/4" SWIVEL CASTERS WITH BRAKE-PJCLT514PH52SBK >
GEARWRENCH® 9713 Flexible Head Open End Regular Length Combination Wrench, 13/16 in Wrench, 12 Points, 0/15 deg Offset, 11.476 in OAL, Polished Chrome/Nickel Plated
GEARWRENCH® Original ratcheting wrenches combine the speed of a ratchet with the access and control of a wrench. They offer the ease of 5 degrees of movement to turn fasteners, versus 30 degrees on standard combination wrenches. The small ratcheting box end head design enables access to tight spots where a ratchet won't fit. The open end allows for easier access on tough to reach spots, making jobs go faster and easier. This set is a great addition to any mechanic tools collection.
Proto® J761/2S2 Diamond Point Chisel, 5/16 in S2 Tool Steel, 6 in OAL, 5/16 in W Blade
Browning® Classical Gripbelt® 3693769 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 9.28 in OD, 8.8 in (A)/9.3 in (B)/9.1 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693769 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 9.28 in OD, 8.8 in (A)/9.3 in (B)/9.1 in (BV) Dia Pitch, 1 in W Face
