"PIX A-50-K--TOP WIDTH- 0.5"", 5/16"" THICKNESS, 52"" OC, KEVLAR © "
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
PIXA50K>
Recently Viewed
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
PIXA50K>
Proto® J86A5/8X12S2 Long Cold Chisel, 3/4 in S2 Tool Steel Tip, 12 in OAL, 3/4 in W Blade
Browning® TorqTaper® Plus PG0003 Type SMTP Shaft Mount Reducer, Solid Shaft Input, Tapered Bore Output, 1 hp, 15:1 Gear Ratio, 116.67 rpm Maximum Output, 36.013 in-lb Input/540.19 in-lb Output Torque Rating
Shaft mount reducers are enclosed helical gear reducers with a hollow output. They are mounted directly on the input shaft of the driven machine and are supported by the shaft and torque arm arrangement or motor mount frame. This eliminates the need for additional components to transmit torque from the reducer to the equipment.
The Peer-Lift® clevis cradle grab hook is an excellent choice for overhead lifting and is also suitable for other applications. The whole chain link is supported by the cradle, therefore keeping 100% of its working load limit. A reliable choice, proof tested at twice the working load limit and fatigue tested at 1.5X the working load limit for 20000 cycles. It meets or exceeds ASTM A952 and OSHA 1910 standards. Applications include chain tightening, tie down and lifting in industries such as construction, automotive, aircraft and farming.
RIDGID® 45780 Feed Screw, For Use With: Model 535-A/535-Manual Pipe and Bolt Threading Machine, Model 820/821 Cutter
RIDGID® 45780 Feed Screw, For Use With: Model 535-A/535-Manual Pipe and Bolt Threading Machine, Model 820/821 Cutter
Plumb® 11406 Regular Claw Hammer, 13 in OAL, Polished/Smooth Face Surface, 16 oz Forged Steel Head, Curved Claw, Fiberglass Handle
Plumb® 11406 Regular Claw Hammer, 13 in OAL, Polished/Smooth Face Surface, 16 oz Forged Steel Head, Curved Claw, Fiberglass Handle
