"PIX A-180-K--TOP WIDTH- 0.5"", 5/16"" THICKNESS, 182"" OC, KEVLAR © "
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
PIXA180K>
Recently Viewed
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
PIXA180K>
Irwin® Hanson® 2665 Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer
36" X 58 BLUE TRASH CANLINER--BOX OF 100-BIOCRB3658 >
Dodge® Tigear-2® 26Q40L14 Standard Right Angle Worm Gear Speed Reducer, Quill Input, Solid A Shaft Output, 1.55 hp, 40:1 Gear, 44 rpm Maximum Output, 1685 in-lb Torque Rating
The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.
7/8" X 27" VARIABLE SPEED BELT OVERALL LENGTH 27.7"-PIX1422V270 >
3/16" X 600' POLYPRO ROPE-GRN409>
