TIMING BELTS
JASON 3843M15 HTB TIMING BELT, SINGLE SIDED, 3MM PITCH, 384 MM PITCH LENGTH, 128 TEETH
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS3843M15 >
JASON 3850-14-M-120 SYNCHRONOUS BELT; 14 MM PITCH; 3850 MM PITCH LENGTH; 120 MM BELT WIDTH; STANDARD HTD TOOTH PROFILE; 14M
FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY AND MAXIMUM FLEXIBILITY. OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER, MADE OF POLYURETHANE
- JAS385014M120>
JASON 390-H-150-U H-PITCH X 39" URETHANE TIMING BELT
ABRASION-RESISTANT POLYURETHANE BODY OFFERS CLEAN RUNNING SYSTEMS WITHOUT ACCUMULATION OF DEBRIS. SYNCHRO-POWER ENDLESS BELTS AND SLEEVES FOR POWER TRANSMISSION ARE MANUFACTURED AS TRULY ENDLESS SYNCHRONOUS BELTS WITH NO JOINT. EXCEPTIONAL RIGIDITY, REDUCED TOOTH FLEXING AND EXCEPTIONAL STABILITY IN THE OVERALL SYSTEM WITH NO LUBRICATION REQUIRED-JAS390H150U>
JASON 390H100 SYNCHRONOUS BELT, 1/2 " PITCH; 39" PITCH LENGTH ;1" BELT WIDTH.78 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS390H100 >
JASON 390H150 SYNCHRONOUS BELT, 1/2 " PITCH; 39" PITCH LENGTH ;1-1/2" BELT WIDTH.78 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS390H150 >
JASON 390L050 3/8-" L PITCH STANDARD TIMING BELT. 39-" PITCH LENGTH, 98 TEETH 12.7 MM WIDTH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS390L050 >
JASON 390L100 3/8-" L PITCH STANDARD TIMING BELT. 39-" PITCH LENGTH, 104 TEETH 1 MM WIDTH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS390L100 >
JASON 400H200 SYNCHRONOUS BELT, 1/2 " PITCH; 40" PITCH LENGTH ;1" BELT WIDTH .80 TEETH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS400H200 >
JASON 410H075 SYNCHRONOUS BELT, 75 " PITCH; 41" PITCH LENGTH; 3/4" BELT WIDTH. 33 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS410H075 >
JASON 420L050 SYNCHRONOUS BELT,375 " PITCH; 42" PITCH LENGTH;.5"" BELT WIDTH. 112 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS420L050 >
JASON 420L100 SYNCHRONOUS BELT,3/8 " PITCH; 42" PITCH LENGTH 1" BELT WIDTH. 112 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS420L100 >
JASON 430H200 SYNCHRONOUS BELT, 1/2 " PITCH; 43" PITCH LENGTH 1-1/2" BELT WIDTH. 86 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS430H150 >
JASON 430H200 SYNCHRONOUS BELT, 1/2 " PITCH; 43" PITCH LENGTH 1-1/2" BELT WIDTH. 86 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS430H100 >
JASON 430H200 SYNCHRONOUS BELT, 1/2 " PITCH; 43" PITCH LENGTH, 2" BELT WIDTH. 86 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS430H200 >
JASON 4505M15 TIMING BELT, 450MM PITCH LENGTH; 25MM BELT WIDTH; STANDARD HTD TOOTH PROFILE 5M
SYNCHRONOUS BELT; 5MM PITCH;450MM PITCH LENGTH; 25MM BELT WIDTH; STANDARD HTD TOOTH PROFILE; 5M; FIBERGLASS TENSILE MATERIAL; RUBBER OUTER MATERIAL
-JAS4505M15 >
JASON 4505M25 TIMING BELT, 450MM PITCH LENGTH; 25MM BELT WIDTH; STANDARD HTD TOOTH PROFILE 5M
SYNCHRONOUS BELT; 5MM PITCH;450MM PITCH LENGTH; 25MM BELT WIDTH; STANDARD HTD TOOTH PROFILE; 5M; FIBERGLASS TENSILE MATERIAL; RUBBER OUTER MATERIAL
-JAS4505M25 >
JASON 450H150 TIMING BELT 0.5 " PITCH, 1.5 " WIDE 45 " PITCH LENGTH, 90 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS450H150 >
JASON 450H300 TIMING BELT 0.5 " PITCH, 3 " WIDE 45 " PITCH LENGTH, 90 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS450H300 >
JASON 480H075 TIMING BELT 0.5 " PITCH, 3 " WIDE 48 " PITCH LENGTH, 33 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS480H075 >
JASON 480H100 TIMING BELT 0.5 " PITCH, 1 " WIDE 48 " PITCH LENGTH, 96 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS480H100 >
JASON 480H150 TIMING BELT 0.5 " PITCH, 1 " WIDE 48 " PITCH LENGTH, 96 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS480H150 >
JASON 480L100 SINGLE SIDED TIMING BELT, L SERIES-3/8 " PITCH, 128 TEETH, 48" PITCH LENGTH, 1" WIDE
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS480L100 >
JASON 510H150 TIMING BELT 0.5 " PITCH, 1/2 " WIDE 51 " PITCH LENGTH, 33 TEETH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS510H150>
JASON 510L075US URETHANE WITH STEEL CORD TIMING BELTS, LPITCH X 51" LENGTH X 3/4" TOP WIDTH
URETHANE WITH STEEL CORD TIMING BELT 510-L-075-US-JAS510L075US>
Recently Viewed
ISOSTATIC™ Century® 104961 Round Bore Sleeve Bearing, 2-7/8 in Dia Bore, 3-3/8 in OD, 4 in W
Browning 20-TOOTH Q-BUSH #60 CHAIN SPROCKET BRW H-60-Q-20
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
80-B-24-F-2-3/16 24-tooth Sprocket For #80-1 Chain
24-TOOTH SPROCKET FOR #80-1 CHAIN - IDC80B24F23/16>
Stanley® Proto® was the first company to market the combination wrench in the United States in 1933. Since then, we have greatly expanded our line of wrenches and developed a range of new products. Our line now includes standard, extra long and short combination, flex head, open end, angle head, box, deep offset box, ratcheting box, obstruction, adjustable, flare nut, striking, slugging, construction, spanner and pipe wrenches. In other words, we have a wrench for nearly any fastener.
1.378X1.969" X .276 OIL SEAL-CHI13933 >
40-GALLON 2-GPM PUMP SKID UNIT SPOT SPRAYER - VALSUO01040AMM>
