TIMING BELTS
JASON 14408M36 8-MM-PITCH X 1440-MM TIMING BELTS
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS14408M36 >
JASON 16008M21 8-MM-PITCH X 1600-MM TIMING BELTS
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT-
JAS16008M21>
JASON 160XL037 XL-PITCH X 16" LENGTH X 3/8" TOP WIDTH TIMING BELT
160 X L037 TMING BELT. HEAT AND ABRASION RESISTANT. THEY HAVE FIBERGLASS TENSION MEMBERS, NEOPRENE BODY WITH NYLON COVERED TEEHT. THEY ALL BOND TOGETHER FOR MAXIMUM STRENGTH
-JAS150XL037 >
JASON 165L050 L-PITCH X 16.5" PITCH LENGTH, .14" HEIGHT, .375" PITCH, .5" WIDTH
EXCEED USA RMA STANDARD IP-24 RATINGS LEVELS. TRAPEZODIAL TOOTH, TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES.
-JAS165L050 >
JASON 1700H100 1/2-" H-PITCH STANDARD TIMING BELT. 170" LENGTH X 1" WIDTH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TOTHE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS1700H100 >
JASON 1700H150 1/2-" H-PITCH STANDARD TIMING BELT. 170" LENGTH X 1-1/2" WIDTH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TP THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS1700H150 >
JASON 170XL050 XL PROFILE TIMING BELT, 17 " PITCH LENGTH, 85 TEETH, 12.7 MM WIDTH
1/5" PITCH XL PROFILE TIMING BELTS. HIGH MODULUS FIBER LOADED POLYCHLOROPRENE RUBBER COMPOUND. FIBERGLASS CORD PROVIDES SUPERIOR TENSILE STRENGTH AND MINIMUM ELONGATION. STRETCHABLE NYLON FABRIC COVERS THE TEETH FOR HIGH ABRASION RESISTANCE
-JAS170XL050 >
JASON 17608M30 8-MM-PITCH DBL/TIMING BELTS
GEARBELT, DOUBLE 220 TEETH, 30MM WIDE, 8 MM PITCH, 1760 MM LONG. TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER IN COST. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
-JASD17608M30
JASON 18008M35 8-MM-PITCH X 1800-MM TIMING BELTS
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS18008M35 >
JASON 18008M40 8-MM-PITCH X 1800-MM TIMING BELTS
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS18008M40 >
JASON 180XL037 8-MM-PITCH X 1760-MM TIMING BELTS
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS17608M50 >
JASON 180XL037 TIMING BELT, 90 TEETH RUBBER GEARED COGGED BELT, 0.37" WIDTH, 0.20" PITCH
COGGED RUBBER SYNCHRONOUS CLOSED LOOP SMALL GEAR DRIVE BELTS
-JAS80XL037>
JASON 187L050 L-PITCH X 18.7" PITCH LENGTH, .14" HEIGHT, .375" PITCH, .5" WIDTH
EXCEED USA RMA STANDARD IP-24 RATINGS LEVELS. TRAPEZOIDAL TOOTH, TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES.
-JAS187L050 >
JASON 189014M85 14-MM-PITCH X 1890-MM ,135 TEETH HTB TIMING BELT
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS189014M85 >
JASON 20008M20 HTB HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1.417" TOP WIDTH, 2000 MM LENGTH, 8 MM TOOTH PITCH, 20 MM WIDE
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS20008M20 >
JASON 20008M50 HTB HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1.417" TOP WIDTH, 2000 MM LENGTH, 8 MM TOOTH PITCH, 50 MM WIDE
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS20008M50 >
JASON 202-L-050 LIGHT STANDARD TIMING BELT, CHLOROPRENE, 3/8" PITCH, 20.2" LENGTH, .5" WIDE
FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY AND MAXINUM FLEXIBILITY. OIL HEAT AND OZONE RESISTANCE: HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-DURABILITY AND WEAR RESISTANCE, INCREASED POWER CAPACITY
-JAS202L050>
JASON 210L050 TRAPEZOIDAL TOOTH PROFILE BELT, LIGHT,21" PITCH LENGTH, .14" HEIGHT 0.375" PTICH, 0.5" WIDE
UNIVERSAL TRAPEZOID TOOTH PROFILES DROP INTO EXISTING SPROCKETS, HIGH-GRADE COMPOUNDING. FIBERGLASS TENSION CORDS FOR EXCELLENT RESISTANCE TO SHRINKAGE.ELONGATION. OIL, HEAT, OZONE, AND ABRASION RESISTANT.
-JAS210L050 >
JASON 210L075 TRAPEZOIDAL TOOTH PROFILE BELT, LIGHT, 21" PITCH LENGTH, .14" HEIGHT 0.375" PTICH, 0.75" WIDE
UNIVERSAL TRAPEZOID TOOTH PROFILES DROP INTO EXISTING SPROCKETS, HIGH-GRADE COMPOUNDING. FIBERGLASS TENSION CORDS FOR EXCELLENT RESISTANCE TO SHRINKAGE.ELONGATION. OIL, HEAT, OZONE, AND ABRASION RESISTANT.
-JAS210L075 >
JASON 225L050 TRAPEZOIDAL TOOTH PROFILE BELT, LIGHT, 25.5" PITCH LENGTH, 0.14" HEIGHT 0.375" PTICH, 0.50" WIDE
UNIVERSAL TRAPEZOID TOOTH PROFILES DROP INTO EXISTING SPROCKETS, HIGH-GRADE COMPOUNDING. FIBERGLASS TENSION CORDS FOR EXCELLENT RESISTANCE TO SHRINKAGE.ELONGATION. OIL, HEAT, OZONE, AND ABRASION RESISTANT.
-JAS255L050 >
JASON 225L075 TRAPEZOIDAL TOOTH PROFILE BELT, LIGHT, 22.5" PITCH LENGTH, 0.14" HEIGHT .375" PTICH, 0.75" WIDE
UNIVERSAL TRAPEZOID TOOTH PROFILES DROP INTO EXISTING SPROCKETS, HIGH-GRADE COMPOUNDING. FIBERGLASS TENSION CORDS FOR EXCELLENT RESISTANCE TO SHRINKAGE.ELONGATION. OIL, HEAT, OZONE, AND ABRASION RESISTANT.
JAS225L075 >
JASON 225L100 TRAPEZOIDAL TOOTH PROFILE BELT, LIGHT, 22.5" PITCH LENGTH, 0 .14" HEIGHT 0.375" PTICH, 1" WIDE
UNIVERSAL TRAPEZOID TOOTH PROFILES DROP INTO EXISTING SPROCKETS, HIGH-GRADE COMPOUNDING. FIBERGLASS TENSION CORDS FOR EXCELLENT RESISTANCE TO SHRINKAGE.ELONGATION. OIL, HEAT, OZONE, AND ABRASION RESISTANT.
-JAS225L100 >
JASON 230XL037 TIMING BELT 10 MM WIDTH, 75 TEETH COGGED RUBBER SYNCHRONOUS CLOSED LOOP SMALL GEAR DRIVE BELTS
HIGH QUALITY AND DURABLE MADE FROM HIGH-QUALITY RUBBER WITH FIBERGLASS REINFORCEMENT. PRECISE POWER TRANSMISSION WITH A 5- MM PITCH AND TRAPEZOIDAL TOOTH PROFILE. LOW NOISE AND SMOOTH OPERATION THESE BELTS ARE DESIGNED TO REDUCE NOISE AND ENSURE SMOOTH MOTION.
-JAS230XL037 >
JASON 2360H200 HEAVY "H" STANDARD TIMING BELT, CHLOROPRENE, 1/2" PITCH, 236" LENGTH, 2.00" WIDE
THIS BELT IS MADE OF FIBERGLASS TENSILE CORD WHICH GIVES HIGH DIMENSIONAL STABILITY. THE CHLOROPRENE BELT BODY MAKES THE BELT RESISTANCE TO OIL, HEAT AND OZONE, AND HIGH TOOTH SHEAR RESISTANCE. THE BELT HAS A NYLON TOOTH COVER
-JAS2360H200 >
Recently Viewed
20-MM X 1.50X65-MM HEX HEAD CAPSCREW-MET96020065F >
MORSE® 43403 1896 Center Cutting Double End Regular Length End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 2 Flutes, 3/16 in Dia Shank, 2-1/4 in OAL, Bright
MORSE® 43403 1896 Center Cutting Double End Regular Length End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 2 Flutes, 3/16 in Dia Shank, 2-1/4 in OAL, Bright
Littelfuse® POWR-GARD® 312007P Type 3AG Fast Acting Cartridge Fuse, 7 A, 250 V AC, 10 kA Interrupt, Cartridge Body
The 3AG fast acting fuse solves a broad range of application requirements while offering reliable performance and cost-effective circuit protection.
Jacobs® 6219D 2BA 3/8 Fluted Medium Duty Drill Chuck, 0.04 to 0.375 in Capacity, 3/8-24 Mounting, Plain Bearing, K2 Key
Jacobs® 6219D 2BA 3/8 Fluted Medium Duty Drill Chuck, 0.04 to 0.375 in Capacity, 3/8-24 Mounting, Plain Bearing, K2 Key
12 TOOTH SPROCKETS FOR #80 CHAIN-BRWH8012X11/4 >
BBI 711166 Semi-Standard Shoulder Screw, Round Head, Alloy Steel, 1 in Dia x 2-1/2 in L Shoulder, 1-3/4-10
BBI 711166 Semi-Standard Shoulder Screw, Round Head, Alloy Steel, 1 in Dia x 2-1/2 in L Shoulder, 1-3/4-10
