JASON 225L100 TRAPEZOIDAL TOOTH PROFILE BELT, LIGHT, 22.5" PITCH LENGTH, 0 .14" HEIGHT 0.375" PTICH, 1" WIDE
UNIVERSAL TRAPEZOID TOOTH PROFILES DROP INTO EXISTING SPROCKETS, HIGH-GRADE COMPOUNDING. FIBERGLASS TENSION CORDS FOR EXCELLENT RESISTANCE TO SHRINKAGE.ELONGATION. OIL, HEAT, OZONE, AND ABRASION RESISTANT.
-JAS225L100 >
Recently Viewed
JASON 225L100 TRAPEZOIDAL TOOTH PROFILE BELT, LIGHT, 22.5" PITCH LENGTH, 0 .14" HEIGHT 0.375" PTICH, 1" WIDE
UNIVERSAL TRAPEZOID TOOTH PROFILES DROP INTO EXISTING SPROCKETS, HIGH-GRADE COMPOUNDING. FIBERGLASS TENSION CORDS FOR EXCELLENT RESISTANCE TO SHRINKAGE.ELONGATION. OIL, HEAT, OZONE, AND ABRASION RESISTANT.
-JAS225L100 >
JASON 470J6 POLY-V 3/32 " PITCH;47" BELT PITCH LENGTH; 9/16" BELT WIDTH; 6 BANDS;
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS470J6 >
15-TOOTH #40-1 CHAIN SPROCKETS IDC 40-B-15-F-5/8
15 TOOTH SPROCKETS FOR #40 CHAIN
JASON 360H200 SYNCHRONOUS BELT, 1/2 " PITCH; 36" PITCH LENGTH;2" BELT WIDTH. 72 TEETH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS360H200 >
H-PITCHX75" DOUBLE TIMING BELT-JASD750H100 >
1000H100 1/2" PITCH STANDARD TIMING BELT, MADE OF SYNTHETIC RUBBER
JAS1100H100 >
