TIMING BELTS
JASON 210L075 TRAPEZOIDAL TOOTH PROFILE BELT, LIGHT, 21" PITCH LENGTH, .14" HEIGHT 0.375" PTICH, 0.75" WIDE
UNIVERSAL TRAPEZOID TOOTH PROFILES DROP INTO EXISTING SPROCKETS, HIGH-GRADE COMPOUNDING. FIBERGLASS TENSION CORDS FOR EXCELLENT RESISTANCE TO SHRINKAGE.ELONGATION. OIL, HEAT, OZONE, AND ABRASION RESISTANT.
-JAS210L075 >
JASON 210L050 TRAPEZOIDAL TOOTH PROFILE BELT, LIGHT,21" PITCH LENGTH, .14" HEIGHT 0.375" PTICH, 0.5" WIDE
UNIVERSAL TRAPEZOID TOOTH PROFILES DROP INTO EXISTING SPROCKETS, HIGH-GRADE COMPOUNDING. FIBERGLASS TENSION CORDS FOR EXCELLENT RESISTANCE TO SHRINKAGE.ELONGATION. OIL, HEAT, OZONE, AND ABRASION RESISTANT.
-JAS210L050 >
JASON 202-L-050 LIGHT STANDARD TIMING BELT, CHLOROPRENE, 3/8" PITCH, 20.2" LENGTH, .5" WIDE
FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY AND MAXINUM FLEXIBILITY. OIL HEAT AND OZONE RESISTANCE: HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-DURABILITY AND WEAR RESISTANCE, INCREASED POWER CAPACITY
-JAS202L050>
JASON 20008M50 HTB HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1.417" TOP WIDTH, 2000 MM LENGTH, 8 MM TOOTH PITCH, 50 MM WIDE
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS20008M50 >
JASON 20008M20 HTB HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1.417" TOP WIDTH, 2000 MM LENGTH, 8 MM TOOTH PITCH, 20 MM WIDE
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS20008M20 >
JASON 189014M85 14-MM-PITCH X 1890-MM ,135 TEETH HTB TIMING BELT
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS189014M85 >
JASON 187L050 L-PITCH X 18.7" PITCH LENGTH, .14" HEIGHT, .375" PITCH, .5" WIDTH
EXCEED USA RMA STANDARD IP-24 RATINGS LEVELS. TRAPEZOIDAL TOOTH, TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES.
-JAS187L050 >
JASON 180XL037 TIMING BELT, 90 TEETH RUBBER GEARED COGGED BELT, 0.37" WIDTH, 0.20" PITCH
COGGED RUBBER SYNCHRONOUS CLOSED LOOP SMALL GEAR DRIVE BELTS
-JAS80XL037>
JASON 180XL037 8-MM-PITCH X 1760-MM TIMING BELTS
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS17608M50 >
JASON 18008M40 8-MM-PITCH X 1800-MM TIMING BELTS
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS18008M40 >
JASON 18008M35 8-MM-PITCH X 1800-MM TIMING BELTS
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS18008M35 >
JASON 17608M30 8-MM-PITCH DBL/TIMING BELTS
GEARBELT, DOUBLE 220 TEETH, 30MM WIDE, 8 MM PITCH, 1760 MM LONG. TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER IN COST. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
-JASD17608M30
JASON 170XL050 XL PROFILE TIMING BELT, 17 " PITCH LENGTH, 85 TEETH, 12.7 MM WIDTH
1/5" PITCH XL PROFILE TIMING BELTS. HIGH MODULUS FIBER LOADED POLYCHLOROPRENE RUBBER COMPOUND. FIBERGLASS CORD PROVIDES SUPERIOR TENSILE STRENGTH AND MINIMUM ELONGATION. STRETCHABLE NYLON FABRIC COVERS THE TEETH FOR HIGH ABRASION RESISTANCE
-JAS170XL050 >
JASON 1700H150 1/2-" H-PITCH STANDARD TIMING BELT. 170" LENGTH X 1-1/2" WIDTH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TP THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS1700H150 >
JASON 1700H100 1/2-" H-PITCH STANDARD TIMING BELT. 170" LENGTH X 1" WIDTH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TOTHE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS1700H100 >
JASON 165L050 L-PITCH X 16.5" PITCH LENGTH, .14" HEIGHT, .375" PITCH, .5" WIDTH
EXCEED USA RMA STANDARD IP-24 RATINGS LEVELS. TRAPEZODIAL TOOTH, TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES.
-JAS165L050 >
JASON 160XL037 XL-PITCH X 16" LENGTH X 3/8" TOP WIDTH TIMING BELT
160 X L037 TMING BELT. HEAT AND ABRASION RESISTANT. THEY HAVE FIBERGLASS TENSION MEMBERS, NEOPRENE BODY WITH NYLON COVERED TEEHT. THEY ALL BOND TOGETHER FOR MAXIMUM STRENGTH
-JAS150XL037 >
JASON 16008M21 8-MM-PITCH X 1600-MM TIMING BELTS
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT-
JAS16008M21>
JASON 14408M36 8-MM-PITCH X 1440-MM TIMING BELTS
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS14408M36 >
JASON 14408M20 8-MM-PITCH X 1440-MM TIMING BELTS
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS14408M20 >
JASON 142XL037 14.2" LENGTH X 0.37" WIDTH TIMING BELT. OIL AND STATIC RESISTANT
142 X L037 TMING BELT. HEAT AND ABRASION RESISTANT. THEY HAVE FIBERGLASS TENSION MEMBERS, NEOPRENE BODY WITH NYLON COVERED TEETH. THEY ALL BOND TOGETHER FOR MAXIMUM STRENGTH
JAS142XL037 >
JASON 140XL037 XL-PITCH X 14"-LENGTH TIMING BELTS
A MULTIPLE CLASSICAL BANDED V-BELT. B SERIES, 14" OUTSIDE LENGTH, 3/8" BELT WIDTH; 1 BAND; POLYESTER TENSILE MATERIAL; RUBBER OUTER MATERIAL
JAS140XL037 >
JASON 1400H300 H-PITCH X 140" LENGTH TIMING BELTS, 3 " WIDTH, 280 TEETH
CONFORMS TO RMA ENGINEERING STANDARD, TIME BELTS ARE MEASURED BY LENGTH, TOOTH OITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIMES NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
-JAS1400H300 >
JASON 140014M85 14-MM-PITCH X 1400-MM TIMING BELTS
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS140014M85 >
Recently Viewed
804 2-lb Non-sparking Copper Hammer With Hickory Wood Handle
2-LB NON-SPARKING COPPER HAMMER WITH HICKORY WOOD HANDLE - COO804>
1-LB-BOX 3/16" PTFE PACKING-20193/161LB>
2"-WIDTH X 27-FOOT-LENGTH RATCHET-STYLE TIE DOWN WITH J-HOOKS
LOAD CAPACITY: 10,000-POUNDS STRAP COLOR: YELLOW
PORTABLE GAS LEAK DETECTORS-GNLNGD268 >
1/8" STAINLESS STEEL ELBOW-FIT1/8SSE >
Proto® J07513SS Standard Length Socket, Imperial, 3/4 in Square Drive, 13/16 in
