TIMING BELTS
3 GROOVE A OR B-BELT 1615-BUSH SHEAVES-GATTL3A4.8/B5.2 >
JAST526016>
3-GRV BANDED 5-VX-1250 V-BELTS-DAYR5VX12503>
1-1/2" WIDE ,1/2" PITCH BELTING FT-JASLH150US >
OPEN END TIMING BELTING (FT)-JASLH100 >
8-MM-PITCH NEOPRENE BELTING (FT)-JASL8M50 >
BELT MATERIAL-JASL8M30URS>
SYNCHRONOUS; 8M;30MM BELT WIDTH; 15240MM BELT LENGTH; FIBERGLASS TENSILE MATERIAL; RUBBER OUTER MATERIAL
-JASL8M30>
JASON HTB HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1.417" TOP WIDTH, 2450 MM LENGTH,
FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY. CHLOROPRENE BELT BODY, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
JAS245014M85 >
GEARBELT, DOUBLE 136 TEETH, 30MM WIDE, 8 MM PITCH, 2400-MM LONG. TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER IN COST. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
ASD510L050 >
GEARBELT, DOUBLE 255 TEETH, 30MM WIDE, 8 MM PITCH, 2400-MM LONG. TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER IN COST. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
JASD24008M30 >
POSITIVE DRIVE TIMING BELT. DUAL SIDED TIMING BELT, H SERIES (1/2" PITCH) 280 TEETH, 140" PITCH LENGTH, 3 "ES WIDE-
JASD1400H300>
JASON 966-14-M-55 HTB HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 966-MM PITCH LENGTH, 14-MM TOOTH PITCH, 55-MM WIDE
TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
- JAS96614M55>
JASON 960-8-M-30 8-MM PITCH X 30-MM TOP WIDTH X 960-MM OUTSIDE CIRCUMFERANCE; 120 TEETH
TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
-JAS9608M30 >
JASON 960-8-M-20 8-MM PITCH X 20-MM TOP WIDTH X 960-MM OUTSIDE CIRCUMFERANCE; 120 TEETH
TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-JAS9608M20>
JASON 960-8-M-12 8-MM PITCH X 12-MM TOP WIDTH X 960-MM OUTSIDE CIRCUMFERANCE; 120 TEETH
TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
-JAS9608M12 >
JASON 900-L-050 TIMING BELT, 240 TEETH, 3/8" PITCH 1/2 " WIDTH 90" CIRCUMFERENCE
BELT IS MADE OF FLEXIBLE NEOPRENE BACKING, FIBERGLASS TENSILE CORD AS REINFORCEMENT. THESE BELTS OFF A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. THE BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER IN COST.
JAS900L050>
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS850H200 >
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS800H200 >
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
- JAS800H075>
JASON 800-8-M20 HTB PROFILE TIMING BELT, 800-MM PITCH LENGTH, 8-MM TOOTH PITCH, 20-MM WIDTH, 8-MM TOOTH, 100 TEETH.
TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
- JAS8008M20>
JASON 800-8-M-50 HTB PROFILE TIMING BELT, 800-MM PITCH LENGTH, 8-MM TOOTH PITCH, 50-MM WIDTH, 8-MM TOOTH, 100 TEETH.
TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
-JAS8008M30 >
JASON 770-5-M-25 OUTSIDE LENGTH 770 MM, WIDTH 25 MM, HEIGHT PITCH-5 MM, MADE OF RUBBER SINGLE BANDS
HTB HIGH TORQUE SYNCHRONOUS BELT, MADE OF CHLOROPRENE. FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE, HIGH TOOTH SHEAR RESISTANCE.
-JAS7705M25>
JASON 750-5-M-25 SYNCHRONOUS BELT; 5-MM PITCH; 750-MM PITCH LENGTH; 25-MM BELT WIDTH; STANDARD HTD TOOTH PROFILE; 5M; FIBERGLASS TENSILE MATERIAL; RUBBER OUTER MATERIAL
FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY AND MAXIMUM FLEXIBILITY. OIL HEAT AND OZONE RESISTANCE: HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-DURABILITY AND WEAR RESTANCE, INCREASED POWER CAPACITY
-JAS7505M25>
Recently Viewed
Starrett® 25R Shockproof Contact Point Set, For Use With AGD Dial Indicator, High Grade Steel
The Starrett Contact Point Set includes: 14 points with #4-48 screw thread to fit AGD indicators; a regular 1/4" (6.3mm) long point; 9 special form points; a 28 shock absorbing anvil; and 3 extra long points 1/2", 3/4" and 1" (13, 19, 25mm) long. The set features high grade steel, hardened and ground. All points are mounted on a convenient aluminum ring for safe keeping and easy selection. Contact Point SET.
15" BLACK ADJUSTABLE WRENCH - ALL26115 >
TELESCOPING ALG/CLIP MATCH HOLDERS-GNL400>
CHAINSAW FILE ORANGE HANDLES-WIN6604 >
12" BLACK ADJUSTABLE WRENCH - ALL26112 >
6' X 6' 14-MIL GREEN VINYL WELDING SCREEN AND FRAME - RII645166>
