TIMING BELTS
JASON 130XL037 XL-PITCH X 13"-LENGTH TIMING BELTS
A MULTIPLE CLASSICAL BANDED V-BELT. B SERIES, 13" OUTSIDE LENGTH, 3/8" BELT WIDTH; 1 BAND; POLYESTER TENSILE MATERIAL; RUBBER OUTER MATERIAL
-JAS130XL037 >
JASON 12808M50 8-MM-PITCH X 1280-MM TIMING BELTS
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS12808M50 >
JASON 1260XH300 TYPE XH TIMING BELT OF 126" LENGTH NUMBER OF TEETH 144, PITCH; 0.875 ", WIDTH 3"
FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY. CHLOROPRENE BELT BODY, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
-JAS1260XH300 >
JASON 1250H150 125" LENGTH X 1.5" WIDTH STANDARD TIMING BELT
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TP THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS1250H150 >
JASON 124L050 L TIMING BELT, RUBBER, 12.4" OUTSIDE CIRCUMFERENCE 1/2" WIDTH, 3/8" PITCH, 33 TEETH
EXCEED USA RMA STANDARD IP-24 RATINGS LEVELS. TRAPEZOIDAL TOOTH, TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES.
JAS124L050 >
JASON 12008M50 8-MM-PITCH X 1200-MM TIMING BELTS
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS11208M50 >
JASON 12005-M-15 TIMING BELT, 120 TEETH, 5MM PITCH
TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-JAS12005M15>
- JAS12005M15>
JASON 11208M36 8-MM-PITCH X 1200-MM TIMING BELTS
HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1120 MM PITCH LENGTH, 8MM TOOTH PITCH, 30MM WIDE. OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESiTANCE
JAS11208M36 >
JASON 11208M30 8-MM-PITCH X 1120-MM TIMING BELTS
HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1120 MM PITCH LENGTH, 8MM TOOTH PITCH, 30MM WIDE. OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESTANCE
-JAS11208M30 >
JASON 1100H100 H-PITCH X 110"-LENGTH TIMING BELTS
1000H100 1/2" PITCH STANDARD TIMING BELT, MADE OF SYNTHETIC RUBBER
JAS1100H100 >
JASON 100XL100 XL-PITCH X 10"-LENGTH TIMING BELTS
100X L100 STANDARD TIMING BELTS, CHLOROPREME, 10" LONG, 1" WIDE
-JAS100XL100 >
JASON 1-AT-10/1500 10-MM PITCH, T10 SERIES, 150 TEETH, 1500-MM PITCH LENGTH , 6-MM SIDE
CONSISTENT DIMENSIONAL STABILITY, LOW PRE-TENSION, LOW NOISE, HIGH ABRASION RESISTANCE, LOW MAINTENANCE, HIGH FLEXIBILITY, LINEAR SPEEDS UP TO 80-M/SECOND.
- JAS16AT10/1500>
JASON 345L050 POSITIVE DRIVE TIMING BELT, L SERIES 3/8" PITCH, 92 TEETH 34.50" PITCH LENGTH 1/2" WIDE
STANDARD TIMING TOOTH PROFILE; L; FIBERGLASS TENSILE MATERIAL; RUBBER OUTER MATERIAL.
-JAS345L050 >
D-900-H-300 JASON INDUSTRIAL PRODUCTS
H-PITCHX90" DOUBLE TIMING BELT-JASD900H300 >
D-900-H-100 H-pitch X 90" Double Timing
H-PITCH X 90" DOUBLE TIMING BELTS-BRWD900H100>
D-850-H-100 JASON INDUSTRIAL PRODUCTS
H-PITCH X 85" DOUBLE TIMING BELT - JASD850H100>
D-800-H-150 JASON INDUSTRIAL PRODUCTS
H-PITCH X 80" DOUBLE TIMING BELT - JASD800H150>
D-800-H-100 JASON INDUSTRIAL PRODUCTS
H-PITCH X 80" DOUBLE TIMING BELT - JASD800H100>
D-800-H-075 JASON INDUSTRIAL PRODUCTS
H-PITCH X 80" DOUBLE TIMING BELT - JASD800H075>
D-800-H-050 JASON INDUSTRIAL PRODUCTS
H-PITCH X 80" DOUBLE TIMING BELT - JASD800H050>
D-750-H-100 JASON INDUSTRIAL PRODUCTS
H-PITCHX75" DOUBLE TIMING BELT-JASD750H100 >
D-700-H-200 JASON INDUSTRIAL PRODUCTS
H-PITCHX70" DOUBLE TIMING BELT-JASD700H200 >
D-660-L-150 JASON INDUSTRIAL PRODUCTS
L-PITCHX66 DOUBLE TIMING BELT-JASD660L150 >
D-660-L-100 JASON INDUSTRIAL PRODUCTS
L-PITCHX66 DOUBLE TIMING BELT-JASD660L100 >
