3/7-M-710-JB 3-rib Banded Polyflex
3-RIB BANDED POLYFLEX BELT-GAT3/7M710JB >
Recently Viewed
3-RIB BANDED POLYFLEX BELT-GAT3/7M710JB >
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
Fluke® 80T-150UA Temperature Probe, -50 to 150 deg C, 46 in L Wire
Knipex® Cobra® XL 87 01 400 SBA Box Joint Pipe Wrench and Water Pump Plier, 3-1/2 in Nominal, 2-1/16 in L x 1-3/4 in W CRV Steel V-Shape Jaw, Serrated Jaw Surface, 16 in OAL
Both the Knipex® Cobra® XL and XXL offer the performance and comfort of water pump pliers while being lighter in weight and having a greater gripping capacity than comparable pipe wrenches. The Cobra® XL can e.g. Grip a 2 in pipe fitting and weighs 50 % less than a 2 in pipe wrench, which has a much lower gripping capacity. With its handy length of 400 mm, the Cobra® XL also fits into a plumber's tool kit. The Cobra® XXL comes along with the weight of a 2 in pipe wrench but offers a back-up gripping capacity up to 4-1/2 in.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
#2014" #10 ZINC SCREW EYES-NTL119032 >
