POLY-V V-BELTS J-K-L-M
PIX 260-J-4 POLY V BELT, 6 RIBS, 20" BELT LENGTH X 0.55" WIDTH X 0.14" THICK
EPDM FOR RESISTANCE TO WEATHERING, OILS, WATER, AND SOME SOLVENTS. SHORT PROFILE FOR FLEXIBILITY, REDUCED HEAT BUILDUP AND PERFORMANCE AT HIGHER SPEEDS. FIBER-REINFORCED RIBS FOR RESISTANCE TO WEAR. SMOOTH RUNNING FOR MINIMAL VIBRATION AT HIGH SPEEDS. MEETS RMA OIL AND HEAT RESISTANCE STANDARDS AND STATIC CONDUCTIVITY REQUIREMENTS.
-PIX260J4 >
PIX 260J10 POLY RIB J V-BELT, 26" , 10 RIBS
EPDM FOR RESISTANCE TO WEATHERING, OILS, WATER, AND SOME SOLVENTS. SHORT PROFILE FOR FLEXIBILITY, REDUCED HEAT BUILDUP AND PERFORMANCE AT HIGHER SPEEDS. FIBER-REINFORCED RIBS FOR RESISTANCE TO WEAR. SMOOTH RUNNING FOR MINIMAL VIBRATION AT HIGH SPEEDS. MEETS RMA OIL AND HEAT RESISTANCE STANDARDS AND STATIC CONDUCTIVITY REQUIREMENTS.-PIX260J10 >
PIX 280-J-6 POLY V BELT, J V-BELT, 28" 6 RIBS
65" LENGTH X .56" WIDTH POLY V BELT. V-RIBBED BELTS ARE IDEAL FOR HIGH SPEED AND HIGH DRIVE RATIO APPLICATIONS, OFFERING SMOOTH, VIBRATION-FREE PERFORMANCE IN A SINGLE, COMPACT DRIVE BELT.
- PIX280J6>
PIX 280J10 POLY V BELT 10 RIBS, 28" BELT LENGTH
10 RIBS X 28" PITCH LENGTH, RIB METRIC BELT. BANDO INDUSTRIAL "J" SERIES POLY-V- BELTS ARE DESIGNED FOR HEAVY DUTY APPLICATIONS.
- PIX280J10>
PIX 290-J-4 POLY V, 4 RIB 29" INDUSTRIAL GRADE "J" V-BELT
POLY-V 4 RIB BELT. 29" METRIC BELT. THE "J" SERIES POLY-V RIBBED BELTS ARE DESIGNED TO BE USED ON EXTRA HEAVY-DUTY APPLICATIONS SUCH AS SANDER/PLANER BELTS, COMPRESSOR BELTS, FITNESS DRIVE BELTS AND ELECTRIC MOTOR DRIVE BELTS.
-PIX290J4 >
PIX 300-J-4 POLY-V BELT, 30" 4 RIB BELT FOR MULTIPLE APPLICATIONS
THE POLY-V BELTS IS A SINGLE, ENDLESS BELT WITH LONGITUDINAL V-SHAPED RIBS THAT MATE PERFECTLY WITH THE V-GROOVES IN THE SHEAVES. THE MULTIPLE V-RIBBED PROFILE PROVIDES FRICTION AND WEDGE ADVANTAGE. MADE OF HIGH-GRADE ENGINEERED RUBBER, OIL, HEAT, OZONE, AND ABRASION RESISTANT.
-PIX300J4 >
PIX 300-J-6 POLY-V BELTS, J-SECTION 30" LENGTH, 6 RIBS
THE POLY-V BELTS IS A SINGLE, ENDLESS BELT WITH LONGITUDINAL V-SHAPED RIBS THAT MATE PERFECTLY WITH THE V-GROOVES IN THE SHEAVES. THE MULTIPLE V-RIBBED PROFILE PROVIDES FRICTION AND WEDGE ADVANTAGE. MADE OF HIGH-GRADE ENGINEERED RUBBER; OIL, HEAT, OZONE, AND ABRASION RESISTANT.
-PIX300J6 >
PIX 315-K-10 SERPENTINE BELT, 31.5" 10 RIBS
31.5" SERPENTINE BELT WITH 10 RIBS DESIGNED FOR OPTIMAL POWER TRANSMISSION AND DURABILITY. MADE OF PREMIUM RUBBER COMPOUND WITH REINFORCED CORD FOR ENHANCED FLEXIBILITY AND LONG LASTING PERFORMANCE. ENGINEERED FOR SMOOTH OPERATION WITH MINIMAL NOISE AND EFFICIENT POWER TRANSFER IN SERPENTINE DRIVE SYSTEMS
-PIX315K10 >
PIX 320-J-4 RUBBER 32" LENGTH X .037" WIDTH X .14" THICKNESS RIBBED V-BELT
MADE FROM EPDM RUBBER MATERIAL, HIGH TEMPERATURE RESISTANCE, OIL RESISTANCE, WEAR RESISTANCE, AND HIGH COEFFICIENT OF FRICTION. THE MULTI-RIB BELT OFFERS THE FLEXIBILITY OF A FLAT BELT WHILE DELIVERING THE HIGH POWER TRANSMISSION PERFORMANCE OF A TRADITIONAL V-BELT. THEY ARE FIT FOR MANY INDUSTRIAL MACHINERY, APPLIANCES, AND POWER TOOLS, SUCH AS COMPRESSORS, PUMPS, LAWNMOWERS, DRILLS
-PIX320J4 >
PIX 320-J-6 V-6 RIBBED 32" LENGTH X 0.55" WIDTH X 0.14" HEIGHT EPDM RUBBER, MULTI WEDGE MICRO V-BELT
MADE FROM EPDM RUBBER MATERIAL, HIGH TEMPERATURE RESISTANCE, OIL RESISTANCE, WEAR RESISTANCE, AND HIGH COEFFICIENT OF FRICTION. THE MULTI-RIB BELT OFFERS THE FLEXIBILITY OF A FLAT BELT WHILE DELIVERING THE HIGH-POWER TRANSMISSION PERFORMANCE OF A TRADITIONAL V-BELT. THEY ARE FIT FOR MANY INDUSTRIAL MACHINERY, APPLIANCES, AND POWER TOOLS, SUCH AS COMPRESSORS, PUMPS, LAWNMOWERS, DRILLS
PIX320J6 >
PIX 350-J-6 V-RIBBED BELT, 6 RIBS, 35" LENGTH X 0.55" WIDTH, EPDM POLY V-BELT
MADE FROM EPDM RUBBER MATERIAL, HIGH TEMPERATURE RESISTANCE, OIL RESISTANCE, WEAR RESISTANCE, AND HIGH COEFFICIENT OF FRICTION. THE MULTI-RIB BELT OFFERS THE FLEXIBILITY OF A FLAT BELT WHILE DELIVERING THE HIGH-POWER TRANSMISSION PERFORMANCE OF A TRADITIONAL V-BELT. THEY ARE FIT FOR MANY INDUSTRIAL MACHINERY, APPLIANCES, AND POWER TOOLS, SUCH AS COMPRESSORS, PUMPS, LAWNMOWERS, DRILLS
PIX350J6 >
PIX 360-J-6 V-RIBBED BELT, 6 RIBS, 36" LENGTH X 0.55" WIDTH, EPDM POLY V BELT
PIX 360-J-6 V-RIBBED BELT, 6 RIBS, 36" LENGTH X 0.55" WIDTH, EPDM POLY V BELT
-PIX360J6 >
PIX 380-J-4 V-RIBBED POLY V BELT, 4 RIBS BELT; 38" KENGTH X 0.37" WIDTH X 0.14" TOP, EPDM POLY V BELT
MADE FROM EPDM RUBBER MATERIAL, HIGH TEMPERATURE RESISTANCE, OIL RESISTANCE, WEAR RESISTANCE, AND HIGH COEFFICIENT OF FRICTION. THE MULTI-RIB BELT OFFERS THE FLEXIBILITY OF A FLAT BELT WHILE DELIVERING THE HIGH-POWER TRANSMISSION PERFORMANCE OF A TRADITIONAL V-BELT. THEY ARE FIT FOR MANY INDUSTRIAL MACHINERY, APPLIANCES, AND POWER TOOLS, SUCH AS COMPRESSORS, PUMPS, LAWNMOWERS, DRILLS
-PIX380J4 >
PIX 380-J-6 V-RIBBED POLY V BELT, 6 RIBS BELT; 38" KENGTH X 0.558" WIDTH X 0.17" TOP, EPDM POLY V BELT
MADE FROM EPDM RUBBER MATERIAL, HIGH TEMPERATURE RESISTANCE, OIL RESISTANCE, WEAR RESISTANCE, AND HIGH COEFFICIENT OF FRICTION. THE MULTI-RIB BELT OFFERS THE FLEXIBILITY OF A FLAT BELT WHILE DELIVERING THE HIGH-POWER TRANSMISSION PERFORMANCE OF A TRADITIONAL V-BELT. THEY ARE FIT FOR MANY INDUSTRIAL MACHINERY, APPLIANCES, AND POWER TOOLS, SUCH AS COMPRESSORS, PUMPS, LAWNMOWERS, DRILLS
-PIX380J6 >
PIX 390-J-6 POLY V BELT, 39" X 0.5500" BELT WIDTH, 6 RIB SERPENTINE BELT
MADE FROM EPDM RUBBER MATERIAL, HIGH TEMPERATURE RESISTANCE, OIL RESISTANCE, WEAR RESISTANCE, AND HIGH COEFFICIENT OF FRICTION. THE MULTI-RIB BELT OFFERS THE FLEXIBILITY OF A FLAT BELT WHILE DELIVERING THE HIGH-POWER TRANSMISSION PERFORMANCE OF A TRADITIONAL V-BELT. THEY ARE FIT FOR MANY INDUSTRIAL MACHINERY, APPLIANCES, AND POWER TOOLS, SUCH AS COMPRESSORS, PUMPS, LAWNMOWERS, DRILLS
PIX390J6 >
PIX 400-J-10 10 RIB GROOVE POLY-V BELT. 40" LENGTH , J SERIES MICRO-V POLY-V V-BELT
BLACK RIBBED BELT RESISTANT TO OIL AND HEAT. J SECTION MICRO RIBBED V-BELTS ARE CATEGORIZED BY THEIR TOP WIDTH AND THE THICKNESS OF EACH RIB. THE TOP WIDTH IS DEPENDENT ON THE NUMBER OF RIBS, AND EACH RIB HAS A NOMINAL THICKNESS OF 5/32". THEY ARE SUITABLE FOR HIGH-SPEED DRIVE SYSTEMS SUCH AS IN WASHING MACHINES, VACUUM CLEANERS, LAWN MOWERS AS WELL AS MEDICAL EQUIPMENT.
-PIX400J10 >
PIX 400-J-6 6 BANDS, 40-5/16" OC OVERALL WIDTH 0.552"
AN EXTREMELY THIN PROFILE GIVES THESE BELTS THE FLEXIBILITY TO BEND AROUND SMALL-DIAMETER PULLEYS. ALSO KNOWN AS SERPENTINE BELTS. THEY HAVE MULTIPLE BANDS THAT FUNCTION AS A SINGLE UNIT FOR CONSISTENT DRIVE PERFORMANCE AND EVEN LOAD DISTRIBUTION. THEY HANDLE SHOCK LOADS BETTER THAN STANDARD BELTS,
-PIX-PIX400J6>
PIX 450-J-6 RUBBER V-BELT, PJ V-RIBBED, 6 RIBS, 45" LENGTH X 0.558" WIDTH X 0.17" HEIGHT
BELT ANGLE IS APPROXIMATELY 40 DEGREES. BELTS ARE CONSTRUCTED IF HIGHLY ENGINEERED, HIGH-PERFORMANCE COMPONENTS AS SINGLE WRAPPED BELTS. THE JOINED OR BANDED BELTS ARE RECOMMENDED PULSATING DRIVES WHERE EXTRA STABILITY IS BENEFICIAL.
-PIX450J6 >
PIX 470-J-6 RUBBER V-BELT, PJ V-RIBBED, 6 RIBS, 47" LENGTH X 0.558" WIDTH X 0.17" HEIGHT
BELT ANGLE IS APPROXIMATELY 40 DEGREES. BELTS ARE CONSTRUCTED IF HIGHLY ENGINEERED, HIGH-PERFORMANCE COMPONENTS AS SINGLE WRAPPED BELTS. THE JOINED OR BANDED BELTS ARE RECOMMENDED FOR PULSATING DRIVES WHERE EXTRA STABILITY IS BENEFICIAL.
-PIX470J6 >
PIX 480-J-10 RUBBER V-BELT, PJ V-RIBBED, 10 RIBS, 48" LENGTH X 0.92" WIDTH
BELT ANGLE IS APPROXIMATELY 40 DEGREES. BELTS ARE CONSTRUCTED IF HIGHLY ENGINEERED, HIGH PERFORMANCE COMPONENTS AS SINGLE WRAPPED BELTS. THE JOINED OR BANDED BELTS ARE RECOMMENDED FOR PULSATING DRIVES WHERE EXTRA STABILITY IS BENEFICIAL.
-PIX470J10>
PIX 480-J-16 RUBBER V-BELT, PJ V-RIBBED, 16 RIBS, 48" LENGTH X 1.47" WIDTH
BELT ANGLE IS APPROXIMATELY 40 DEGREES. BELTS ARE CONSTRUCTED IF HIGHLY ENGINEERED, HIGH-PERFORMANCE COMPONENTS AS SINGLE WRAPPED BELTS. THE JOINED OR BANDED BELTS ARE RECOMMENDED FOR PULSATING DRIVES WHERE EXTRA STABILITY IS BENEFICIAL.
-PIX480J16>
PIX 480-J-6 RUBBER V-BELT, PJ V-RIBBED, 16 RIBS, 48" LENGTH X 9/16" WIDTH
BELT ANGLE IS APPROXIMATELY 40 DEGREES. BELTS ARE CONSTRUCTED IF HIGHLY ENGINEERED, HIGH-PERFORMANCE COMPONENTS AS SINGLE WRAPPED BELTS. THE JOINED OR BANDED BELTS ARE RECOMMENDED FOR PULSATING DRIVES WHERE EXTRA STABILITY IS BENEFICIAL.
-PIX480J6 >
PIX 490-J-6 J V-BELT SECTION 49" OC 6-RIBBED, 0.55" TOP WIDTH
BELT ANGLE IS APPROXIMATELY 40 DEGREES. BELTS ARE CONSTRUCTED IF HIGHLY ENGINEERED, HIGH-PERFORMANCE COMPONENTS AS SINGLE WRAPPED BELTS. THE JOINED OR BANDED BELTS ARE RECOMMENDED FOR PULSATING DRIVES WHERE EXTRA STABILITY IS BENEFICIAL.
PIX490J6 >
PIX 500-J-16 POLY RIB J V-BELT, 50" OC, 16 RIBS, 1-1/2" TOP WIDTH
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 16 RIBS-HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX500J16>
Recently Viewed
Milwaukee® 2136-20 M18™ ROCKET™ Tower Light/Charger With 2.1 A USB Charging, LED Lamp, 18 V, 3 Heads
The MILWAUKEE® M18™ ROCKET™ Tower Light/Charger is designed to deliver a lighting solution that adapts, performs, and survives to the jobsite. This light tower sets up in seconds to a max height of 7’ and collapses to less than 4’ for easy transportation and storage. The LED light head can be extended from 4-7’ to light overhead work or minimize shadows when casting shine downward. The multidirectional light head allows users to orient the three independently pivoting light heads to cast light in several directions. The integrated AC plug allows the light to be plugged in with a standard extension cord and charges any M18™ REDLITHIUM™ pack or use the USB port to charge devices on site. Delivering 6,000 lumens, it fills up large areas with TRUEVIEW™ High Definition light. For optimized control over the output and run-time, the M18™ ROCKET™ LED Light has three output settings. The LEDs never need to be replaced and are backed by a limited lifetime warranty.
JAS1926V427>
Carlon® E989N-CAR Non-Metallic Rigid Molded Junction Box, 8 in H x 8 in W x 4 in D, Screw Cover, NEMA 4/4X NEMA Rating, Noryl
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. These premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service-free product life.
OIL SEALS-2.063" X 2.997" X .438"-CHI20586>
The Klein Tools #2 Square-Recess Tip Screwdriver has an 8-Inch Round-Shank for work on combination head receptacles, switch and panel screws. The Cushion-Gripâ„¢ handle allows for greater torque and comfort. Patented Tip-Ident quickly identifies the type of screwdriver and screwdriver tip orientation.
16-MJIC X 1"-FPT 90-D HYD/ADAPTERS-DAY25021616>
