580-J-16 PIX BELTS
16-RIB POLY-V V-BELT - PIX580J16>
Recently Viewed
16-RIB POLY-V V-BELT - PIX580J16>
GP® 4058R Standard Length Socket, 1 in, 1-13/16 in Hex Socket, 6 Points
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
NJ-2305 Cylindrical Roller Bearing
CYLINDRICAL ROLLER BEARING - GULNJ2305>
Koyo B-2412 Inch Series Open Ends Round Bore Uncaged Drawn Cup Needle Roller Bearing, 1-1/2 in Dia Bore, 1-7/8 in OD, 1 Row, 3/4 in W, 8290 lb Dynamic/15900 lb Static Load
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
