360-J-10 PIX BELTS
10-RIB POLY-V V-BELT-PIX360J10 >
Recently Viewed
10-RIB POLY-V V-BELT-PIX360J10 >
CONSOLIDATED BRG RCB-3/4 RCB Needle Roller Bearing, 0.75 in Dia Bore, 1 in Dia Outside, 1 in W
CONS RCB-3/4 RCB Needle Roller Bearing, 0.75 in Dia Bore, 1 in Dia Outside, 1 in W
Dichtomatik 67192236 O-Ring, 6 mm ID x 10 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom H-2 X 6
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
1.825" X 2.623" X .250" RADIAL SHAFT SINGLE LIP GREASE SOLID OIL SEAL - CHI18055>
22-16 HEAT SHRINK FORK TERMINAL #10-DEL5UGJ9>
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
