23040-K Taper-ID Spherical Roller Bearing
TAPER-ID SPHERICAL ROLLER BEARING - GUL23040K>
Recently Viewed
TAPER-ID SPHERICAL ROLLER BEARING - GUL23040K>
Gates® Power Transmission Polyflex® 3M515 Light Duty V-Belt, 3M Section, 1/8 in W Top, 20.28 in L Outside, 3/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
1/2" FLEX CONDUIT CONNECTOR-ELEL441 >
19-MM ID JAW COUPLING HALFS-LOVL090X19MM>
Milwaukee® M18™ 2659-20 Compact Cordless Impact Wrench With Pin Detent, 1/2 in Straight Drive, 3350 bpm, 183 ft-lb Torque, 18 V DC, 6 in OAL
The M18™ cordless 1/2 in. Compact Impact Wrench is the most powerful 1/2 in. Compact Impact Wrench in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee® built 4-pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,450 RPM, 3,350 ipm and 183 ft-lbs of fastening torque for class-leading performance. REDLINK™ Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18™ cordless 1/2 in. Compact Impact Wrench features a 1/2 in. pin-detent anvil for maximum socket retention, an LED light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.
Koyo HJ-101812 Inch Series Caged Heavy Duty Needle Roller Bearing, 5/8 in Dia Bore, 1-1/4 in OD, 3/4 in W, 4350 lbf Dynamic/4650 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
