PI-121612 an inch-series solid inner ring (inner race) designed for heavy-duty needle roller bearings.
• Inside Diameter (Bore): 3/4 inch (0.7500 in / 19.05 mm)
• Outside Diameter (Raceway): 1 inch (1.0000 in / 25.40 mm)
• Overall Width: 3/4 inch (0.7500 in / 19.05 mm)
• Component Type: Separable Inner Ring Only
• Material: High-Carbon Chrome Bearing Steel (Hardened & Ground)
Recently Viewed
PI-121612 an inch-series solid inner ring (inner race) designed for heavy-duty needle roller bearings.
• Inside Diameter (Bore): 3/4 inch (0.7500 in / 19.05 mm)
• Outside Diameter (Raceway): 1 inch (1.0000 in / 25.40 mm)
• Overall Width: 3/4 inch (0.7500 in / 19.05 mm)
• Component Type: Separable Inner Ring Only
• Material: High-Carbon Chrome Bearing Steel (Hardened & Ground)
3/8" DIAMETERX1/2" SOCKET SET SCREWS-HOL32172 >
5-OZ YEL WITH STRIP & GASKET ADHESIVE-MMM8001 >
14-MM-PITCH X 3850-MM TIMING BELT - JAS385014M170>
Coilhose® CMF18 Conical Muffler, 1/8 in MPT Port, 7/16 in Hex, 29/32 in OAL
Coilhose® CMF18 Conical Muffler, 1/8 in MPT Port, 7/16 in Hex, 29/32 in OAL
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
