NEEDLE BEARINGS

PERMAGLIDE BEARING-INAPAPZ1624P10>

PERMAGLIDE BEARINGS-INAPAPZ1616P10>

PERMAGLIDE BEARING-INAPAPZ1416P10>

PERMAGLIDE BEARING-INAPAPZ0808P10>

TRACK ROLLER BEARING-GULNUTR15>

THRUST NEEDLE BEARING-IKONTB1629>

3/8"-ID FLAT THRUST NEEDLE BEARING-TORNTA613 >

1-3/8"-ID THRUST NEEDLE BEARINGS-TORNTA2233 >

3/4"-ID FLAT THRUST NEEDLE BEARING-TORNTA1220 >

45-MM-ID NEEDLE BEARING-INANKX45Z>

• Bore Diameter (d): 35 mm
• Outside Diameter (D): 50 mm
• Width (B): 20 mm
• Inner Ring Raceway Diameter (Fw): 40 mm
• Basic Dynamic Load Rating (\(C_{r}\)): 33.5 kN (33,500 N)
• Basic Static Load Rating (\(C_{0r}\)): 56.0 kN (56,000 N)
• Limiting Speed: 11,400 RPM
• Weight: ~0.121 kg

12-MM-ID NEEDLE BEARING-INANKI20/20>

• Under-Roller Diameter (Fw / Bore Size): 65 mm (2.5591 in)
• Outside Diameter (D): 78 mm (3.0709 in)
• Overall Width (C): 35 mm (1.3780 in)
• Cage Material: Sheet Steel Cage
• Basic Dynamic Load Rating (Cr): 66,000 N (14,837 lbf)
• Basic Static Load Rating (C0r): 142,000 N (31,922 lbf)
• Limiting Speed: 7,200 RPM
• Approximate Weight: 314 g (0.69 lbs)

35-MM-ID NEEDLE BEARING - INANK35/20>

24-MM-ID NEEDLE BEARING-GULNK24/20 >

18-MM-ID NEEDLE BEARING-GULNK18/16 >

12-MM-ID NEEDLE BEARING-INANK12/12>

10-MM-ID NEEDLE BEARINGS-INANK10/12>

• Shaft Diameter (Under Roller / Bore \(F_{w}\)): 2-3/4 inches (2.7500 in / 69.85 mm)
• Note: In imperial needle bearing nomenclature, the first digit "44" denotes the bore size in sixteenths of an inch (44/16" = 2.75").
• Outside Diameter (D): 3-1/2 inches (3.5000 in / 88.90 mm)
• Note: The second digit "56" in standard cross-references indicates the outer diameter in sixteenths of an inch (56/16" = 3.5").
• Overall Width (C or B): 1-1/2 inches (1.5000 in / 38.10 mm)
• Note: The final digit "24" indicates the outer ring width in sixteenths of an inch (24/16" = 1.5").
• Dynamic Load Rating (\(C_{r}\)): 22,300 lbf (99,200 N)
• Static Load Rating (\(C_{0r}\)): 45,000 lbf (200,000 N)
• Limiting Speed (Oil): 6,500 RPM

2-1/2"-ID NEEDLE BEARING - INANCS4024>

• Inside Diameter (Bore): 2.25 inches (57.15 mm)
• Outside Diameter (OD): 3.00 inches (76.2 mm)
• Width: 1.50 inches (38.1 mm)
• Basic Dynamic Load Rating: 20.4 kN
• Basic Static Load Rating: 37.5 kN
• Structure: Single row of needle-shaped rollers

2"-ID NEEDLE BEARING - INANCS3220>

2"-ID NEEDLE BEARING - INANCS3216>

• Bore Diameter (Under Rollers - \(F_{w}\)): 1.750 inches (44.450 mm)
• Outside Diameter (OD): 2.3125 inches (58.738 mm)
• Width (B): 1.000 inch (25.400 mm)
• Basic Dynamic Load Rating (\(C_{r}\)): 9,400 lbf (41.8 kN)
• Basic Static Load Rating (\(C_{0r}\)): 16,500 lbf (73.4 kN)
• Limiting Speed: 10,000 RPM (Oil lubrication)
• Material: 52100 High-carbon chrome steel