NEEDLE BEARINGS
TRA-815 .030" Angular Contact Thrust Bearing Washers
.030" ANGULAR CONTACT THRUST BEARING WASHERS-TORTRA815 >
TRA-613 Angular Contact Thrust Bearing Washers
ANGULAR CONTACT THRUST BEARING WASHERS - TORTRA613 >
TRA-411 Angular Contact Thrust Bearing Washers
ANGULAR CONTACT THRUST BEARING WASHERS-TORTRA411 >
TRA-1220 Angular Contact Thrust Bearing Washers
ANGULAR CONTACT THRUST BEARING WASHERS-TORTRA1220 >
TC-3648 This component features an ultra-low-profile design engineered exclusively to support heavy axial (thrust) loads in one direction within tight mechanical spaces. It does not accommodate radial forces and must be paired with appropriate thrust wash
• Bore Diameter (Inside d): 2-1/4 inches (2.2500 in / 57.15 mm)
• Note: In standard imperial needle thrust nomenclature, the first digit "36" denotes the bore diameter in sixteenths of an inch (36/16" = 2.25").
• Outside Diameter (Outer D): 3 inches (3.0000 in / 76.20 mm)
• Note: The second digit "48" indicates the outer diameter in sixteenths of an inch (48/16" = 3.0").
• Overall Thickness/Width (b1): 5/64 inch (0.0781 in / 1.984 mm)
• Dynamic Axial Load Capacity: 6,000 lbf (26.7 kN)
• Static Axial Load Capacity: 32,000 to 35,000 lbf
• Limiting Speed: ~5,500 RPM
TC-3244 an inch-series axial needle roller and cage assembly designed to handle high axial (thrust) loads in highly compact spaces.
• Bore Diameter (ID): 2.000 inches (50.8 mm)
• Outside Diameter (OD): 2.750 inches (69.85 mm)
• Overall Width (Thickness): 0.0781 inches (1.984 mm)
• Dynamic Load Capacity: 5,800 lbf (25.8 kN)
• Static Load Capacity: 32,500 lbf (144.5 kN)
• Maximum Speed: 4,000 RPM (with oil lubrication)
• Cage Material: Alloy steel
TC-2435 e assembly designed to absorb heavy thrust loads within a highly compact profile.
• Inside Diameter (Bore): 1.5000 inches (38.100 mm)
• Outside Diameter (OD): 2.1875 inches (55.563 mm)
• Overall Width (Thickness): 0.0781 inches (5/64" / 1.984 mm)
• Dynamic Thrust Capacity (\(C_{a}\)): 4,750 lbf (21.1 kN)
• Static Thrust Capacity (\(C_{0a}\)): 23,200 lbf (103.0 kN)
• Limiting Speed: 5,000 RPM (with oil lubrication)
• Cage Material: Hardened alloy steel
TC-1220 3/4"-ID Flat Thrust Needle Bearing
3/4"-ID FLAT THRUST NEEDLE BEARING-INATC1220>
TAF-61212 6" X 12" X 12" Metric Needle
6" X 12" X 12" METRIC NEEDLE BEARING-IKOTAF61212 >
SCE-3216 inch-series drawn cup needle roller bearing featuring an open-end design.
• Under-Roller Bore Diameter (\(F_{w}\)): 2.0000 inches (50.800 mm)
• Outside Diameter (D): 2.3750 inches (60.325 mm)
• Width (C): 1.0000 inch (25.400 mm)
• Basic Dynamic Load Rating (\(C_{r}\)): 41.5 kN (9,330 lbf)
• Basic Static Load Rating (\(C_{0r}\)): 80.0 kN (17,985 lbf)
• Limiting Speed: 5,100 RPM (Oil lubrication)
• Mass (Weight): ~0.225 lbs (102 g)
SCE-2824 an inch-series drawn cup needle roller bearing featuring an open-end design.
• Under-Roller Bore Diameter (\(F_{w}\)): 1.7500 inches (44.450 mm)
• Outside Diameter (D): 2.1250 inches (53.975 mm)
• Width (C): 1.5000 inches (38.100 mm)
• Basic Dynamic Load Rating (\(C_{r}\)): 62.0 kN (approx. 14,000 lbf)
• Basic Static Load Rating (\(C_{0r}\)): 130.0 kN (approx. 29,000 lbf)
• Limiting Speed (Grease): 6,300 RPM
• Mass (Weight): ~0.315 lbs (143 g to 163 g depending on cage variant)
Recently Viewed
SINGLE GROOVE A OR B-BELT 3/4" -ID SHEAVES
12" 32-TPI HACKSAW BLADES - ALL61228 >
7/8"-9X1.312" THREADED INSERTS-THR108114 >
71876 4" X 1/4" X 5/8" Metal Type 27 Grinding Wheel, Depressed Center. Aluminum Oxide-for71876
4" X 1/4" X 5/8" METAL TYPE 27 GRINDING WHEEL, DEPRESSED CENTER. ALUMINUM OXIDE-FOR71876 -FOR71876 >
1/2" -D KEYWAY BROACH SET-DUM22215 >
SCOTCHBRITE KITCHEN SCRUB SPONGES-JWH607828>
