S-3-PPB-5-ST FAFNIR/TIMKEN BEARINGS
FLANGETTE BEARINGS-FAFS3PPB5ST>
Recently Viewed
FLANGETTE BEARINGS-FAFS3PPB5ST>
Steel spur gears in 20 to 2 Diametral Pitch - 14.5 deg pressure angle stocked. Other circular, metric or D. P. sizes made-to-order in 14.5 deg, 20 deg or other pressure angles from steel, nylon, phenolic, bronze, cast iron or other materials up to 96 in Dia Internal gears and ground external profiles may be provided subject to equipment limitations.
DeWALT® DW505 Dual Range Heavy Duty Lightweight VSR Hammer Drill, 1/2 in Keyed Chuck, 120 VAC, 13 in OAL
The Classic Series Material is the most popular in the Industry. It combines the strength and waterproof qualities of PVC with the durability of a polyester backing. The 200J yellow jacket features a snap front, take up snaps at the wrists,detachable hood with drawstring, and 2 front patch pockets. Come back to the Classics for your protective wear needs.
6003-2-RS Radial/Deep Groove Ball Bearing - Straight Bore, 17 mm ID, 35 mm OD, 10 mm Width, Double Sealed, Without Snap Ring, C3 Internal Clearance
• Bore Diameter (Inner Ring): 17 mm
• Outside Diameter: 35 mm
• Width: 10 mm
• Enclosure Type: Double Sealed (Contact rubber seals on both sides, abbreviated as 2RS or 2RSH)
• Seal Material: Nitrile Butadiene Rubber (NBR)
• Lubrication: Factory pre-greased for maintenance-free operation
• Max Speed: Typically ranges from 12,000 to 19,000+ RPM under grease lubrication
United Abrasives-SAIT 82430 EA-F Industrial Open Coated Industrial Shop Roll, 50 yd L x 2 in W, 240 Grit, Very Fine Grade, Aluminum Oxide Abrasive, Cloth Backing
