BALL BEARINGS
DOUBLE SEALED MINI BALL BEARING-GULR4A2RS >
DOUBLE SHIELDED BALL BEARING-IDCR4AZZ >
DOUBLE SHIELDED MINI BALL BEARING-GULR4AZZ >
DOUBLE SEALED MINI BALL BEARINGS
DOUBLE SHIELDED BALL BEARING-IDCR4ZZ >
DOUBLE SHIELDED MINI BALL BEARINGS
The MRC R4ZZ is an inch-series, single-row radial deep groove ball bearing manufactured by MRC (a brand under SKF). It is a small Conrad-type bearing designed for high-speed industrial automation and motion control applications that handle radial and moderate thrust loads. Key Specifications Bore Diameter (Inner): 0.2500 inches (1/4 in) Outside Diameter: 0.6250 inches (5/8 in) Width: 0.196 inches (approx. 5 mm) Enclosure Type: Double shielded/sealed ("ZZ" indicates two protective closures to keep grease in and dirt out) Load Capacities: Supports a 332 lbf dynamic load and a 139 lbf static load Precision Rating: ABEC-1 standard industrial precision
DOUBLE OPEN FACE BALL BEARING-GULR6 >
DOUBLE SEALED BALL BEARING-GULR62RS >
DOUBLE SEALED BALL BEARING WITH SNAP RING-GULR62RSNR >
DOUBLE SHIELDED BALL BEARING-GULR62Z >
DOUBLE OPEN FACE BALL BEARING-GULR8 >
DOUBLE SEALED BALL BEARING-GULR82RS >
DOUBLE SHIELDED BALL BEARING - GULR82Z>
DOUBLE SHIELDED BALL BEARING
R14-FF Double Shielded Deep Groove Ball Bearing
Cylindrical Bore Deep Groove Ball Bearing
Item #100755640
Deep Groove Bearing
0.88 in Inner Diameter
1.88 in Outer Diameter
0.5 in Width
Bearing Steel Material
DOUBLE SHIELDED MINI BALL BEARINGS
BEARING-GULRA100RR7 >
1" -ID BALL BEARING-FAFRA100RR7 >
1-7/16" ID CARTRIDGE BEARINGS-FAFRC17/16>
DOUBLE SEALED BALL BEARING-GULRLS102RS >
Inner Diameter (Bore): 1.5/8 inches (approx. 41.275 mm) Outer Diameter: 3.1/2 inches (88.9 mm) Width (Thickness): 3/4 inches (19.05 mm) Type: Open imperial deep groove ball bearing Load Support: Handles radial and axial loads in both directions
5/8" -ID DOUBLE SEALED BALL BEARING-GULRLS52RS >
1X21/2X3/4" SHIELDED BEARING-GULRMS8ZZ >
Recently Viewed
Browning® 1069459 Split Taper Bushing, 1-5/16 in Dia Bore, 1.8555 in Small End/1.9375 in Large End Dia Barrel, 3 in Dia Flange, 1-15/16 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Morse® 177962 MHS Advanced Hole Saw, 6 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 5/8-18 Arbor
Morse, MHS96 (177962), 6" (152mm) diameter, bimetal hole saw is designed for general purpose use, cutting a wide range of materials including stainless steel, machinable metals, wood and plastic. Aggressive, positive rake tooth profile penetrates material easier and faster. Unique side slot increases leaverage access for various thicknesses of materials, easing slug removal. One (1) hole saw per box. Seperate arbor required, use Morse MA35PSN (139052) or MA45PSN (139069). To optimize performance consider using Morse CUTLUBE (121408).
Browning® 767982 VE Series Standard-Duty Straight Bore Ball Bearing Insert With Seal Flinger, 1-3/4 in Dia Bore, 3.347 in OD, 2.219 in W, 7901 lb Dynamic/5139 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
FHP V-BELTS-BRW5L490>
FHP V-BELTS-BRW5L420>
DOUBLE SEALED THIN BALL BEARING-GUL619082RS >
