BALL BEARINGS
BALL BEARING WITH SNAP RING-GUL7612DLG >
BALL BEARING WITH SNAP RING-GUL7616DLG >
BALL BEARING WITH SNAP RING-GUL7620DLG >
77-R-10 a premium single-row, double-shielded deep groove radial ball bearing designed for 5/8-inch fractional shafts.
• Bore Diameter (Inner): 5/8 inch (0.6250")
• Outside Diameter (Outer): 1-3/8 inches (1.3750")
• Overall Width: 11/32 inch (0.3438")
• Enclosure Type: Double Shielded Metal Closures (ZZ / S7KDD)
• Radial Static Load Capacity: ~654 lbf
• Radial Dynamic Load Capacity: ~1,034 to 1,260 lbf (brand variance)
• Max Speed Rating: ~21,000 to 24,000 RPM (Grease lubricated)
• Row Configuration: Single Row Non-Fill Slot
77-R-14 a premium single-row, double-shielded deep groove radial ball bearing designed for 7/8-inch fractional shafts
• Bore Diameter (Inner): 7/8 inch (0.8750")
• Outside Diameter (Outer): 1-7/8 inches (1.8750")
• Overall Width: 1/2 inch (0.5000")
• Enclosure Type: Double Shielded Metal Closures (ZZ)
• Radial Static Load Capacity: 1,301 lbf
• Radial Dynamic Load Capacity: 2,266 lbf
• Max Speed Rating: ~16,000 to 18,000 RPM (Grease lubricated)
• Row Configuration: Single Row Non-Fill Slot
77-R-16 the exact same premium single-row, double-shielded deep groove radial ball bearing
• Bore Diameter (Inner): 1.0000 inch (1")
• Outside Diameter (Outer): 2.0000 inches (2")
• Overall Width: 0.5000 inch (1/2")
• Enclosure Type: Double Shielded Metal Closures (ZZ / S10KDD)
• Radial Static Load Capacity: 1,338 lbf
• Radial Dynamic Load Capacity: 2,259 lbf
• Max Speed Rating: ~15,000 RPM (Grease lubricated)
• Row Configuration: Single Row Non-Fill Slot
77-R-8 (also cataloged as NDH 77R8) is a vintage single-row deep groove inch-series ball bearing.
R Light Inch Series Ball Bearing
Item #102072506
Single Row Radial Bearing
1/2" ID x 1 1/8" OD x 5/16" Wide
Double Shielded
No Snap Ring
Standard (ABEC 1)
77036 Double Sealed a standard miniature metric single-row radial deep groove ball bearing.
DOUBLE SEALED BALL BEARINGS-GEN77036>
77505 NEW DEPARTURE BEARINGS a vintage, metric single-row deep-groove ball bearing featuring double enclosures.
• Bore Diameter (Inner ID): 25 mm (0.9843 in)
• Outside Diameter (Outer OD): 52 mm (2.0472 in)
• Width (Thickness): 15 mm (0.5906 in)
• Structure: Single-row deep-groove radial ball alignment
• Enclosure: Double-sided shielding or contact lip seals
SPECIAL L/MOWER BALL BEARINGS-GEN850488>
WIDE INNER RACE BALL BEARINGS -GUL87008 >
BALL BEARING-GUL87016 >
BALL BEARINGS -GEN870288 >
WIDE INNER RACE BALL BEARINGS-BCA87503>
WIDE INNER RACE BALL BEARING-GUL87503 >
WIDE INNER RACE BALL BEARING -GUL87505 >
WIDE INNER RACE BALL BEARING-GUL87507 >
WIDE INNER RACE BALL BEARING-GUL88107 >
88504 single-row, deep-groove radial ball bearing that features an extended inner ring and double felt seals.
• Bore Diameter (Inner ID): 20 mm
• Outside Diameter (Outer OD): 47 mm
• Inner Ring Width: 17.75 mm (0.6988 in)
• Outer Ring Width: 14.00 mm (0.5512 in)
• Enclosure: Double sealed (historically felt, modernly rubber)
WIDE INNER RACE BALL BEARING - NTN88505 >
WIDE INNER RACE BALL BEARING-NTN88506 >
WIDE INNER RACE BALL BEARINGS-BCA88506BR>
WIDE INNER RACE BALL BEARING-NTN88507 >
Recently Viewed
Gates® Power Transmission Tri-Power® V80® AX29 Heavy Duty V-Belt, 1/2 in W Top, 31 in L Outside, 5/16 in THK, AX Section, EPDM
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
The Starrett 156M Screw Pitch Gage includes locking device, 28 leaves, and 0.25-2.50mm range. 60 Deg Threads.
GEARWRENCH® 80555 Socket Set, ASME B107.1, 6 Points, 3/8 in Drive, 11 Pieces, Included Socket Size: 1/4 to 1 in
GEARWRENCH sockets are manufactured from alloy steel for maximum durability and strength. Our off corner loading design reduces fastener rounding and the chamfered opening help guide the socket on to fasteners. Our sockets feature a double line (SAE) and knurled (metric) ring help easily identify standard and metric sockets. The 11 piece 3/8" Drive 6 Point SAE Deep Length Socket Set includes sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", & 7/8" and includes a socket rail for storage & organization.
2000-ML PURELL HAND SANITIZER-GOJ2256>
1/2" X 1/8" COPPER SWEAT REDUCER-NIB600R1/2X1/8 >
