BALL BEARINGS
6311-2-RS Double Sealed Radial Bearing
Inner Diameter (Bore): 55 mm Outer Diameter (OD): 120 mm Width (Thickness): 29 mm Dynamic Load Rating: 74.1 kN Static Load Rating: 45 kN Limiting Speed: 3,800 RPM Temperature Range: -20 °C to +120 °C (-4 °F to +248 °F) Material: High-quality 52100 chrome steel with a pressed sheet steel cage
6311-2-RS-NR Double Sealed Ball Bearing With
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL63112RSNR >
6311-2-Z-NR Double Shielded Ball Bearing With
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL63112ZNR >
6312-2-Z Double Shielded Ball Bearing
Bore Diameter (Inner): 60 mm Outside Diameter: 130 mm Width: 31 mm Weight: Approximately 1.70 – 1.75 kg Enclosure Type: Double metal shields (indicated by the 2Z suffix
6312-ZZ-NR Double Shielded Ball Bearing With
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL6312ZZNR >
6313 Double Open Face Bearing
Deep groove ball bearing
Single row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance
6313-2-Z-NR Double Shielded Ball Bearing With
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL63132ZNR >
Recently Viewed
3/4" -ID 6203 BALL BEARING-GUL62033/42RS >
33-GALLON TRASHCAN LINERS--PACKAGE OF 12-JWH605349 >
MOTOR BASE ADAPTER-BRWMBA115H >
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL60032RSNR >
DOUBLE ROW SEALED BALL BEARING WITH SNAP RING-GUL53062RSNR >
Milwaukee® 49-22-8310 Quick-Change Electrician's Hole Saw Sheet Cutter Kit, 7 Pieces, For Use With 49-57-0035 and 49-57-0037 Quick-Change Arbor, Carbide Tip
For materials up to 3/16 in. these Carbide tipped sheet metal cutters produce fine, burr-free holes in a variety of materials. They are ideal for stainless steel, structural steel studs and electrical boxes. They can also improve your production in cast iron, brass, aluminum and other thin non-ferrous metals. These cutters are designed to be used in hand held drills to achieve drill press quality holes. The Carbide tips stay sharper longer than high-speed steel or bi-metal cutters giving these cutters longer life. Lubrication during drilling extends the life of the Carbide cutter. Milwaukee recommends the use of Hawg wash cutting fluid for best results. Hawg wash fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Arbors 49-57-0035 or 49-57-0037 are needed for these cutters.
