BALL BEARINGS
Bore Diameter (Inner): 30 mm Outside Diameter: 72 mm Width: 19 mm Dynamic Load Rating: 29.6 kN Static Load Rating: 16 kN Limiting Speed: 11,000 r/min Reference Speed: 20,000 r/min
DOUBLE SEALED BALL BEARING-NTN6306LL >
DOUBLE SEALED BALL BEARING WITH SNAP RING-NTN6306LLNR >
DOUBLE SHIELDED BALL BEARING-NTN6306ZZ >
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-NTN6306ZZNR >
BALL BEARINGS-NAC63072NSLNR>
DOUBLE SEALED BALL BEARING-GUL63072RS >
DOUBLE SEALED BALL BEARING-GEN63072RS>S
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL63072RSNR >
DOUBLE SHIELDED BALL BEARING-GUL63072Z >
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL63072ZNR >
DOUBLE SEALED BALL BEARING-NTN6307LL >
DOUBLE SEALED BALL BEARING WITH SNAP RING-NTN6307LLNR >
DOUBLE SHIELDED BALL BEARING-NTN6307ZZ >
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-NTN6307ZZNR >
BALL BEARINGS-NAC6307ZZNR>
Bore (Inner) Diameter: 40 mm Outside Diameter: 90 mm Width (Thickness): 23 mm Basic Dynamic Load Rating: 42.3 kN Basic Static Load Rating: 24 kN Limiting Speed: Up to 11,000 RPM (depending on variant and lubrication) Weight: 637 grams
DOUBLE SEALED BALL BEARING-GUL63082RS >
DOUBLE SEALED BALL BEARINGS-GEN63082RS>
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL63082RSNR >
DOUBLE SHIELDED BALL BEARING-GUL63082Z >
Deep Groove Ball Bearing, Double Shielded
DOUBLE SEALED RADIAL BALL BEARING-NTN6308LL >
DOUBLE SEALED BALL BEARING WITH SNAP RING-NTN6308LLNR >
Recently Viewed
C-3-GNY HOOKS WITH PIN-COV2183 >
2" STEEL KNOCK-OUT SEAL-ELELT1996 >
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
MORSE® 59029 5968 Center Cutting High Performance Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, Bright
MORSE® 59029 5968 Center Cutting High Performance Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, Bright
GP® 1016D Deep Length Socket, 3/8 in Drive, 1/2 in Socket, 6 Points
GEARWRENCH has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back and forth movement required while cutting threads on either taps or dies. The 5° ratcheting arc with reversing lever eliminates hand over hand turning. The hex die adapters work on either round or hex shaped dies.
