GAY-25-NPP-B INA BEARING a premium single-row radial insert ball bearing.
• Bore Diameter (d): 25 mm
• Outer Ring Diameter (D): 52 mm
• Total Inner Ring Width (B): 27 mm
• Outer Ring Width (C): 15 mm
• Basic Dynamic Load Rating (\(C_{r}\)): 14,000 N to 14,900 N (14–14.9 kN)
• Basic Static Load Rating (\(C_{0r}\)): 7,800 N (7.8 kN)
• Fatigue Load Limit (\(C_{ur}\)): 410 N
• Operational Temperature Range: -20°C to +120°C (-4°F to 248°F)
• Fixing Device: Two M6 x 0.75 threaded grub screws (uses a 2.5 mm hex key)
• Component Weight: ~0.15–0.16 kg (0.35–0.42 lbs)
Recently Viewed
• Bore Diameter (d): 25 mm
• Outer Ring Diameter (D): 52 mm
• Total Inner Ring Width (B): 27 mm
• Outer Ring Width (C): 15 mm
• Basic Dynamic Load Rating (\(C_{r}\)): 14,000 N to 14,900 N (14–14.9 kN)
• Basic Static Load Rating (\(C_{0r}\)): 7,800 N (7.8 kN)
• Fatigue Load Limit (\(C_{ur}\)): 410 N
• Operational Temperature Range: -20°C to +120°C (-4°F to 248°F)
• Fixing Device: Two M6 x 0.75 threaded grub screws (uses a 2.5 mm hex key)
• Component Weight: ~0.15–0.16 kg (0.35–0.42 lbs)
Topaz's Rigid 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are defect free to ensure a secure connection to Rigid conduit and to preserve longevity. Available in sizes from 1/2” to 6”; UL listed, HDG, meets Federal specification WW-C-563.
Coilhose® LE0404 Street Elbow, 1/4 in Nominal, MNPT x FNPT End Style, Brass, Domestic
Coilhose® Pneumatics high quality Brass Pipe Fittings are available in a wide variety of thread sizes and shapes to connect, adapt or control any air or water line. They are designed for use with brass, copper or iron pipe.
10" X 10" X 2" AIR FILTER
F4B-SXR-010 Dodge® 131102 203 Series Normal Duty Non-Expansion Ball Bearing Unit, 5/8 in Dia Bore, 2.13 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 3 in OAL/Dia
F4B-SXR-010 Dodge® 131102 203 Series Normal Duty Non-Expansion Ball Bearing Unit, 5/8 in Dia Bore, 2.13 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 3 in OAL/Dia
