BALL BEARINGS
6307-ZZ-NR Double Shielded Ball Bearing With
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-NTN6307ZZNR >
6307-LL-NR Double Sealed Ball Bearing With
DOUBLE SEALED BALL BEARING WITH SNAP RING-NTN6307LLNR >
6307-2-Z-NR Double Shielded Ball Bearing With Snap Ring
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL63072ZNR >
6307-2-RS-NR Double Sealed Ball Bearing With Snap Ring
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL63072RSNR >
6307-2-RS Radial/Deep Groove Ball Bearing - Straight Bore, 35 mm ID, 80 mm OD, 21 mm Width, Double Sealed, Without Snap Ring
DOUBLE SEALED BALL BEARING-GEN63072RS>S
6306-ZZ-NR Double Shielded Ball Bearing With
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-NTN6306ZZNR >
6306-LL-NR Double Sealed Ball Bearing With
DOUBLE SEALED BALL BEARING WITH SNAP RING-NTN6306LLNR >
6306-2-Z Double Shielded Bearing
Bore Diameter (Inner): 30 mm Outside Diameter: 72 mm Width: 19 mm Dynamic Load Rating: 29.6 kN Static Load Rating: 16 kN Limiting Speed: 11,000 r/min Reference Speed: 20,000 r/min
6306-2-RS-NR Double Sealed Ball Bearing With Snap Ring
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL63062RSNR >
6306-2-RS a standardized, highly popular metric-series single-row radial deep groove ball bearing belonging to the "3 Medium" series footprin
DOUBLE SEALED BALL BEARING-GEN63062RS>
6305-ZZ-NR Double Shielded Ball Bearing With
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-NTN6305ZZNR >
6305-ZZ Double Shielded Radial/Deep Groove Ball Bearing - Straight Bore, 25 mm ID, 62 mm OD, 17 mm Width, Double Shielded
DOUBLE SHIELDED BALL BEARINGS-GEN6305ZZ>
Recently Viewed
These very handy depth gages can be used to quickly obtain measurements in 64th of an inch or 1/2mm by simply adjusting the rule to the required depth. 0-150mm Range, mm/1/2mm.
THRUST BALL BEARING-SNR7204BA>
Browning® 1073337 QD Bushing, 1-3/4 in Dia Bore, 3-13/16 in Dia Barrel, 6 in Dia Flange, 2.64 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
NSK Cylindrical Roller Bearings are available with a patented high strength cage design in pressed steel, machined brass or polyamide. Special materials are available for more arduous applications. Cylindrical bearings offer low noise and low heat generation and by virtue of the line contact between rolling elements and raceways, have high radial load capacity which are suited for high-speed applications.
2-1/2" -ID BUSHING-BRW3020X21/2 >
