BALL BEARINGS
6310-2-RSRadial/Deep Groove Ball Bearing - Straight Bore, 50 mm ID, 110 mm OD, 27 mm Width, Double Sealed, Without Snap Ring, C3 Internal
DOUBLE SEALED RADIAL BALL BEARINGS-GEN63102RS>
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL63102RSNR >
DOUBLE SEALED RADIAL BALL BEARING-GUL63102RS >
Bore Diameter: 50 mm (inner diameter) Outside Diameter: 110 mm Width: 27 mm Seals: Dual rubber contact seals (-2RS / -2RS1) to keep dust out and grease in Clearance: Often sold with C3 internal clearance for higher thermal expansion
DOUBLE SHIELDED BALL BEARING-NTN6309ZZ >
DOUBLE SEALED BALL BEARING WITH SNAP RING-NTN6309LLNR >
DOUBLE SEALED RADIAL BALL BEARING-NTN6309LL >
DOUBLE SHIELDED BALL BEARING-GUL63092Z >
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL63092RSNR >
6309-2-RS Double Sealed Radial/Deep Groove Ball Bearing - Straight Bore, 45 mm ID, 100 mm OD, 25 mm Width, Double Sealed, Without Snap Ring, C3 Internal Clearance
DOUBLE SEALED BALL BEARING-GEN63092RS>
DOUBLE SEALED RADIAL BALL BEARING-GUL63092RS >
DOUBLE OPEN FACE BALL BEARING-NTN6309 >
6308-ZZ Radial/Deep Groove Ball Bearing - Straight Bore, 40 mm ID, 90 mm OD, 23 mm Width, Double Shielded, Without Snap Ring
DOUBLE SHIELDED BALL BEARINGS-GEN6308ZZ>
DOUBLE SHIELDED BALL BEARING-NTN6308ZZ >
SINGLE SHIELDED BALL BEARINGS-FAG6308ZR>
DOUBLE OPEN FACE BALL BEARING-GUL6308M >
DOUBLE SEALED BALL BEARING WITH SNAP RING-NTN6308LLNR >
DOUBLE SEALED RADIAL BALL BEARING-NTN6308LL >
Deep Groove Ball Bearing, Double Shielded
DOUBLE SHIELDED BALL BEARING-GUL63082Z >
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL63082RSNR >
DOUBLE SEALED BALL BEARING-GUL63082RS >
6308-2-RS Double Sealed a standardized metric-series single-row radial deep groove ball bearing from the "3 Medium" series footprint.
DOUBLE SEALED BALL BEARINGS-GEN63082RS>
Bore (Inner) Diameter: 40 mm Outside Diameter: 90 mm Width (Thickness): 23 mm Basic Dynamic Load Rating: 42.3 kN Basic Static Load Rating: 24 kN Limiting Speed: Up to 11,000 RPM (depending on variant and lubrication) Weight: 637 grams
Recently Viewed
TAPER LOCK METRIC SPROCKET-IDC08B30TB >
Browning 29-TOOTH #40-1-CHAIN SPROCKETS BRW H-4029 X 1-1/4
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
SNAP FASTENERS WITH SCREWS--PK/4-NTL192179 >
2 GROOVE BANDED 3-V-630 V-BELT-GAT2/3V630 >
DOUBLE SEALED BALL BEARING - GUL16572RS>
TAPERED ROLLER BEARING CONES-TPR15126 >
