7210-B FAG BEARINGS
THRUST BALL BEARING-FAG7210B>
Recently Viewed
THRUST BALL BEARING-FAG7210B>
2" X 110-YDS TAN PACKING TAPE-CAN119T2110 >
STEP 3 INSECT & FERTILIZER-JWH723401>
Midland Industries 80065 Liquid Filled Gauge, 0 to 160 psi Pressure, 1/4 in Connection, 2-1/2 in Dia Dial, +/- 1.5 % Accuracy
Midland Industries 80065 Liquid Filled Gauge, 0 to 160 psi Pressure, 1/4 in Connection, 2-1/2 in Dia Dial, +/- 1.5 % Accuracy
Dodge® 119119 Stock Bore Taper Lock Bushing, 1-11/16 in Dia Bore, 3.38 in Dia Barrel, 1-3/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
Browning® 1045517 VP Series Type 2 Variable Pitch Sheave, 1-1/8 in Finished Bore, 5.35 in OD, 1 Groove, 3.9 to 4.7 in (3L)/4.2 to 5.2 in (A/4L)/4.4 to 5.4 in (B/5L) Dia Pitch, 3/4 to 1-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
