6202-2-RS a standard light-duty, single-row deep groove radial ball bearing equipped with rubber contact seals on both sides.
• Inside Diameter (Bore): 15 mm (0.591 inches)
• Outside Diameter (OD): 35 mm (1.378 inches)
• Width: 11 mm (0.433 inches)
• Max Speed: ~13,000 to 15,000 RPM (depending on in
Recently Viewed
6202-2-RS a standard light-duty, single-row deep groove radial ball bearing equipped with rubber contact seals on both sides.
• Inside Diameter (Bore): 15 mm (0.591 inches)
• Outside Diameter (OD): 35 mm (1.378 inches)
• Width: 11 mm (0.433 inches)
• Max Speed: ~13,000 to 15,000 RPM (depending on in
12-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-12-F1.3/16
12 TOOTH SPROCKETS FOR #60 CHAIN
United Abrasives-SAIT 23200 Thin High Speed Cut-Off Wheel, 6 in Dia x 1/16 in THK, 5/8 in Center Hole, A36T Grit, Aluminum Oxide Abrasive
Dichtomatik 67191875 O-Ring, 54 mm ID x 60 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Greenlee® 1434AV Screw Drive, For Use With Manual Driver, Knockout Punch Kit, 7360SB and 7361SB Knockout Punch Kit, 3/4-15 x 1-12 x 5.87 LG, 8 ga Max Cutting Depth
Greenlee® 1434AV Screw Drive, For Use With Manual Driver, Knockout Punch Kit, 7360SB and 7361SB Knockout Punch Kit, 3/4-15 x 1-12 x 5.87 LG, 8 ga Max Cutting Depth
22-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-22-F1.3/16
22 TOOTH SPROCKETS FOR #60 CHAIN
