309-S-ZZ-G Single Row Ball Bearing a high-capacity, 300-S Medium Series single-row radial deep groove ball bearing outfitted with double rub
Single row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.
Recently Viewed
309-S-ZZ-G Single Row Ball Bearing a high-capacity, 300-S Medium Series single-row radial deep groove ball bearing outfitted with double rub
Single row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.
STRAIGHT-ID SELF-ALIGN BALL BEARING-GUL22042RS >
H-PITCH X 51" TIMING BELT - JAS510H100>
DOUBLE OPEN FACE BALL BEARING-GUL6007 >
DOUBLE SEALED BALL BEARING-GUL60/322RS >
Gardner Bender HST-125 Heat Shrink Tubing, 1/8 in ID Expanded, 1/16 in ID Recovered, 4 in L, Polyolefin, Black
Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120 deg C (250 deg F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125 deg C: CSA C22.2 No3 198.1, 125 deg C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637, DEF STAN 59-79, Issue 3 Type 2a. Continuous operating temperature: -55 deg C (-67 deg F) to 135 deg C (275 deg F). Shrink temperature: 120 deg C (250 deg F) to 250 deg C (480 deg F). 600 V/Mil Dielectric strength.
